User's Guide

CR805 Retransfer Card Printer User’s Guide 35
6. Remove the new ink ribbon from its package. Hold the ribbon cores and pull them up from
the package base.
7. Install the ink ribbon.
a. Slide the blue supply spool onto the
cartridge until it clicks into place. The
supply roll can go on only one way and fits
only on the correct side of the cartridge.
b. Route the ink ribbon around the rollers on
the cartridge. A diagram on the cartridge
shows the correct routing pattern.
c. Slide the empty silver take-up spool onto
the cartridge until it clicks into place.
d. Turn the take-up spool clockwise just
enough to take up any slack in the ribbon.
8. Continue with “Replace the Cleaning Sleeve”.
The package also includes a new cleaning sleeve. Refer to “Replace the Cleaning
Sleeve” on page 36.
a
b
c
d