Operator's Guide
Table Of Contents
- PB8500 Operators Guide
- Table of Contents
- Chapter 1: Introduction
- Chapter 2: System Power On and Power Off
- Chapter 3: Load Supplies
- Chapter 4: Production
- Chapter 5: Preventive Maintenance
- Chapter 6: Troubleshooting
Operator’s Guide 15
Pause and Resume the System
You can pause the system with the Controller software, or by pressing the
Pause/Resume button on the Output module.
The Pause/Resume button has a built-in light that shows the following system
states:
Green flashing light—System is
paused.
Green light on, but not flashing—
System is in the normal running or
idle state.
No light—System is temporarily
between the pause and running
state.