Operator's Guide

28 Production
3. Perform one of the following steps.
 Select the Job Setup file (click Browse, navigate to the file location, and
click Open).
or
 If selection criteria are set up, select the Use Selection Criteria check
box to let the program search through existing Job Setups (which
contain the selection criteria) to find a name that matches the job file.
4. Click Load to load the job into the database. The job displays in the Ready
Jobs and All Jobs lists. You can view the load status monitor on the status
bar to see the load completion percentage.
To run a loaded job, refer to “Run Jobs” on page 28.
Run Jobs
After loading one or more jobs, use the following procedure to run them.
1. Open the Production window (Applications > Production).
2. Click the Ready Jobs tab.
3. Select the job. You can select multiple files to run contiguously.
4. Click Start.
 Job Setups specify which Data Setups, Production Options
Setups, Audit Setups, and Passport Setups the job uses.
 Depending on your security privileges, jobs that display in the
Ready Jobs and All Jobs tab have a right-click menu with
options to open the setups used, view the data, and export
the setups.
• You can click and drag using your mouse and use Alt+Click or
Shift+Click to select multiple jobs.
• If a job has any rejected passports, or has passports that were
previously held and are now not held, select that job and then
click Remake to run the job again.
• Do not attempt to remove any books until the machine is
paused and a message appears notifying you that it is OK to
do so.