Operator's Guide

Operator’s Guide 29
User Input Needed Dialog
If you have the Vision Verification or Quality Assurance module, the User Input
Needed dialog box displays if a quality issue is detected by one of these
modules. The message prompts you to take some action to make sure that the
job completes successfully. Production does not continue until you take action.
You can click the Override check box to continue for this production run if
needed.
View Job Information
When a job is running, perform the following steps to view information about
that job.
1. In the Production Station (Applications > Production), select the All Jobs
tab.
2. Select the running job.
3. Click the Job Details tab (you also can click View Details). The Job Details
tab provides information to monitor (in real time) the status of individual
passports within a job. For detailed information, refer to “Job Details Tab”
on page 43.
4. To see error messages related to the job, click the Production tab. Messages
display at the bottom of the screen. You can select the check box next to
the message types (Error, Caution, Information) that you want to view in
the message pane.
5. Double-click a status message to view details about that message.
There might be a delay between the time you select a function
button and the time when the system is ready for another input.