Operator's Guide

38 Production
Hold/Reject Passports from a Job
Perform one of the following procedures to hold, reject, or remove a product
from a job.
1. In the Production window (Applications > Production) under the All Jobs
tab, select a job from the list.
2. Select the Job Details tab. The Job Details screen contains a list of all
passports in the selected job.
3. To reject a passport or passports from the job:
 Select a passport or passports from the list.
 Click Set Reject on the upper bar to reject the passport manually. (The
passport must first have been processed successfully in order to be
rejected manually.)
4. To override the “Reject” status, select any rejected passports from the list,
and then click Set Good.
5. To hold a passport or passports from being processed when the job runs:
 Select a passport or passports from the list.
 Click Hold on the upper bar.
 To release the hold, select any passports with a "Hold" status from the
list, and then click Release Hold.
Delete Jobs
Perform the following steps to delete a job permanently from the database.
1. In the Production window (Applications > Production), select the All Jobs
tab.
2. Select a job or jobs from the list, and then click Delete Job on the upper bar
to remove the job(s) permanently from the database.
• You cannot select non-consecutive multiple jobs.
• When a job is deleted, so is the Audit Report backup.
• Deleting a job cannot be undone.