Operator's Guide

Operator’s Guide 59
Page Turning Module
If the booklet is still closed when it gets jammed in the Paging module, use the
following procedure to remove it.
1. Lift the module hood.
2. Push the back plate down and remove the booklet from the rear.
3. Rehome the back plate.
Booklet Opener Module
1. Lift the module hood.
2. Use your hand to pull back the horizontal guide and pull the booklet out
towards you.
3. If necessary, turn the pulleys on the entry assembly to advance the booklet
into the middle of the module so it can be pulled out.
Multi-Book Chip Module
1. Lift the module hood.
2. Turn leadscrew to gain access to jammed booklet.
3. Remove jammed booklet from right side of coupler assembly.
4. Using leadscrew, return the coupler assembly to the home position.
Caution: Be careful not to wrinkle or rip the booklet when removing.