Operator's Guide
Table Of Contents
- PB8500 Operators Guide
- Table of Contents
- Chapter 1: Introduction
- Chapter 2: System Power On and Power Off
- Chapter 3: Load Supplies
- Chapter 4: Production
- Chapter 5: Preventive Maintenance
- Chapter 6: Troubleshooting
62 Troubleshooting
Buffer/Closer/QA Module
Use the following procedure to extract a jammed booklet from the Closer or
Verification module.
1. Lift the module hood.
2. Use your hand to dislodge the jammed booklet. Move the booklet near the
closing area of the booklet track. Refer to (1) in the figure below.
3. Lift the hinged track guide to release the horizontal opened cover of the
booklet (2).