Service Manual

Page 4 of 6
Intentional Radiator Information
Description/Model Number
FCC ID
Frequency
Effective
Radiated
Power(ERP) mW
PX10 supplies rfid
GDI-Q20010
13.56MHz
9.16E-06
PX30 supplies rfid
GDI-Q30030
13.56MHz
9.16E-06
Central Issuance supplies rfid
GDI-SID004
13.56MHz
1.96E-07
LX30, RX10 supplies rfid
GDI-506241001
13.56MHz
3.03E-05
EX30 supplies rfid
GDI-Q30130
13.56MHz
9.16E-06
FP65 supplies rfid
GDI-Q10055
13.56MHz
3.65E-05
Central Issuance smartcard coupler
GDI-50543001
13.56MHz
1.45E-05
PX40, AX10 supplies rfid
GDI-523442001
13.56MHz
1.472E-04
PB8500 DOD rfid
GDI-523669DOD3
13.56MHz
6.28E-10
Warning: This is a class A product. This equipment is compliant with class A of either
CISPR32 or CISPR22. In a domestic/residential environment this equipment may cause radio
interference in which case the user may be required to take adequate measures.
WEEE: The model RX10 and PX40 printers uses a lithium coin cell battery. See the service
manual for battery removal instructions.
EMC Compliance Notice: For model RX10/Multi-hopper configurations, to ensure
compliance with Conducted Immunity standard EN61000-4-6, use USB cables not longer
than 3 meters in length.
REACH: Under the terms of REACH regulation No 1907/2006, suppliers of articles generally
must provide recipients with notification and information on Substances of Very High
Concern (SVHC) if those substances are present above a concentration limit of 0.1% weight
by weight (w/w). A list of such SVHCs is posted on Entrust.com under the “Legal and
Compliance” page.