User`s manual

4 Channel (Basic)

Network Video Recorder

User’s Manual

English

3.3.3 Event Triggers

Wehavenisheddeninghowaneventwillbetriggeredandwhich

serverswill be receivingnotications inthe previoustwo sections,

nowwecannishuptheeventcongurationbysetting:

• whichchannelswillhaveeventtriggerfunctionenabled

• Whatisconsideredtobeanevent

• Wherethewarningswillbesenttoandhowtheywillbesent

Select Channels to Enable Event Trigger and which type

of event should be triggered

• Use the checkbox to enable event trigger on the desired

channels

* Once motion detection is enabled in this page, please congure the motion area

and enable motion detection in the corresponding channels (cameras). The NVR

only detects the rst motion area set in the camera. The NVR recognizes the rst

motion area by its ID number set in the camera.