User manual

27
23. One can even perform testing on the four different channels of either the Quad Flame
Projectors or the Single Flame Projectors. To enter the test screen, one should have a
connection with the DMX USB Pro active. To perform the testing, one should click on Test to
open the testing window below:
24. One should click on the color that needs to be tested and upon clicking; the flame projectors will
shoot that particular color. Thus, if the ‘Red Flames’ button is pressed, the Flame projectors will
receive the signal to shoot the Red Flames. The flames will keep on shooting the color selected
until the button is depressed. An example of a testing on the red flames can be seen in the
screenshot below: