User's Manual

BHF-200 uses a rechargeable battery that must be fully charged before you use it
For the first time.
Connect the supplied vehicle power charger to power socket and then to your
Hands-Free. The status of indicator on Vehicle charger will be illuminated red
while charging and change to Green when the Hands-Free is fully charged.
It takes approximately 2 hours to fully charge the Hands-free
NOTICE:
If battery is Low, Blue light of the LED 3 will blink in every second.
3. BLUETOOTH PAIRING
Before using your hands-free for the first time with a mobile phone or another
Bluetooth device, you must first pair it with the device.
Follow the steps below for most devices. You can also refer your phone user guide.
1) Turn on both devices.
For Hands-free, press the multifunction button for two seconds.
2) Place the Hands-free in pairing mode by pressing and holding the volume
down
Button for six seconds. Release the button when the status indicator begin to
flash with beep sound.
NOTICE:
If the pairing is not success for two minutes, the Hands –free becomes to
stands-by mode.
3) Use your phone’s menu to search for Bluetooth audio devices and select
“BHF-200”
4) When the phone display asks for a pass key, enter “0000”.
The Bluetooth icon appears on the display, once the hands-free successfully
paired.
If the Hands-free stops responding to button presses, you must reset the
Hands-free.