User's Manual

Press the button on CODAWheel for 15 seconds until green and red LEDs flash
alternately. CODAWheel is now ready for pairing. From your smartphone, go to
Bluetooth settings and initiate pairing. For step-by-step instructions, please refer to
your smartphone manual.
3. Configuration Application
CODAWheel is pre-configured to emulate smartphone’sHome button.Using the
configuration application, you can change its settings to perform tasks such as:
- Voice command:Click to start Siri or Google Now.
- Voice command with music control:Emulate headphone in-line remote button.
- Camera shutter release:With a camera application running, click to take photos.
- Compatible applications:Use CODAWheel as a remote button for 3
rd
party
applications. Refer to the application manual for details.
The name of the configuration application is CODAWheel. It can be downloaded and
installed from Apple App Store® or Google Play Store® on your smartphone.
4. Sleep Mode
To conserve battery power, CODAWheel enters sleep mode after a period of
inactivity. Click CODAWheel to leave sleep mode. Red LED will start to blink and the
connection between your phone and CODAWheel will resume. Once CODAWheel
becomes active, it does not require any other setup.
5. Mounting