User's Manual

EZBee series Manual / Ver. 1.0
47
8
88
8 EBI
EBI EBI
EBI Commands
CommandsCommands
Commands
8.1
8.18.1
8.1 EBI
EBIEBI
EBI mode overview
mode overviewmode overview
mode overview
To provide more flexible communication method in EZBee formats, the
EBI (EZBee Binary Interface) communication mode is developed. In EBI
mode, the receiving modem can be assigned. Furthermore, the data are
transmitted to a specific group modems or to all modems in a PAN.
Following AT command is useful to enter EBI mode from ASCII mode.
Command Parameter Result Description
ATB
None OK Convert a communication mode to EBI
8.2
8.28.2
8.2 EBI
EBI EBI
EBI mode communication
mode communicationmode communication
mode communication
In EBI mode, following packet is utilized for data transmission.
SOP Type ID Length DATA
1byte 1byte 1byte 1byte Variable length
The effective values of each field are summarized as:
Field Value Meaning
SOP
0x55 Start Of Packet
Type
Refer EBI type Message type
ID
0~0xFF sender/receiver ID
Length
0~0x50 Data length
DATA
- -