User's Manual

EZBee series Manual / Ver. 1.0
56
coordinator. In this example, a short- address of EZBEE module is
assigned as 0001
00010001
0001(hexadecimal).
Now, we call this terminal as a Router
RouterRouter
Router Terminal
TerminalTerminal
Terminal , and the EZBee M100
connected to the coordinator terminal as a Router
RouterRouter
Router Module
ModuleModule
Module .
4.
4. 4.
4. Testing message transmission in
Testing message transmission in Testing message transmission in
Testing message transmission in ASCII
ASCII ASCII
ASCII mode
modemode
mode
To transmit a message in ASCII mode, type a following command on a
coordinator terminal. “
““
“AT&MSG=
AT&MSG=AT&MSG=
AT&MSG=<DstID>,
,,
,<Msg>”
””
”
In here, DstID and Msg mean a receiver ID and a sending message,
respectively. The sending message should be prepared as ASCII
hexadecimal format. Following example shows that the receiver ID,
‘DstID’ is 1
11
1, and the sending message, ‘Msg’ is “
““
“3030303030303030
30303030303030303030303030303030
3030303030303030”
””
”.
When the command is completed successfully, firstly the Transaction ID