User guide

EST9120/EST16120 User Guide
28
DESCRIPTION
System information.
LOAD DEFAULT
Select OFF or ON. Select ON to load defaults.
DATE FORMAT
Select the preferred date and time display
SET DATE&TIME
Set the current date and time. After setting is done, press the SEL button
and select CONFIRM. Then the system is automatically rebooted to
apply the settings.
USB UPGRADE
Select this item to upgrade firmware by using USB memory stick.
Refer to the direction from the section 6.UPGRADING FIRMWARE.
LANGUAGE
User can select a language.
DLS
User can set to ON or OFF for DLS(Daylight Saving) by using LEFT or
RIGHT button. After selecting ON, move the cursor to
BEGIN(MM/DD/HH)field and press the SELECT button to set the start
time of DLS. And move to END(MM/DD/HH)field to set the stop time of
DLS by using UP or DOWN button.
CAUTION: -DLS can’t start from 23:00
-DLS can’t be applied, if the date of BEGIN and END is same.
Figure 3.5.2. DVR ID setup screen