Ultra light Professional Vacuum www.garryvac.com OWNER’S MANUAL By WWW.GARRYVAC.
welcome! Congratulations on your purchase of the Garry™ Ultra Light Professional Vacuum! With the Garry™ vacuum, you don’t have to sacrifice the power of the heavier vacuums. This amazing product combines the convenience and ease of a lightweight vacuum with the power you can count on. No more sore backs from vacuuming, no more ignoring the upstairs because you don’t feel like lugging the heavy vacuum. The Garry™ Ultra Light weight vacuum will get your carpet or hard floors clean quickly and easily.
1 2 Important safety Instructions Product overview Read all instructions before using your Garry™ vacuum. WArning: To reduce the risk of fire, electric shock, or injury: Handle Do not leave your Garry™ vacuum cleaner plugged in. Always unplug from the outlet when not use and before servicing. To reduce the risk of electric shock, do not use your Garry™ vacuum cleaner outdoors or on wet surfaces. Do not allow this or any appliance to be used as a toy.
3 4 BOX CONTENTS Handle (Includes 2 Bolts and Nuts) assembly instructions STEP 1 Remove the 2 nuts and bolts from the handle. Insert handle tube into the square tube on the bag as shown. Verify the handle tube’s cord hook is facing away from the outer bag as shown in the image to the right and the cord is positioned as shown. Insert the bolts and nuts in order to secure the handle tube to the outer bag. Carefully tighten with a screwdriver. Do not overtighten.
6 (Assembly Instructions continued) (Assembly Instructions Continued) STEP 3 STEP 5 Gently insert the hose into the hose attachment socket and twist clockwise until it softly clicks. Do not apply excessive force. Wind the cord around the upper and lower cord hook. Place the accessories in the storage pocket. Upper and Lower Hooks CLEANING STEP 4 Raise the hose over the lowest hook on the handle and insert it into the hose retainer cup. Next, clip the hose into the hose clamp.
7 8 Instructions for Use Maintenance Cleaning carpets and floors Replacing the filter bag Unwind enough cord for the area you wish to clean with your Garry™ vacuum cleaner. NOTE: You can quickly remove the entire cord length by simply twisting the upper cable hook 1/2 turn and removing the entire cord. See Figure 1. If you notice a loss of suction, the first thing you should do is check the bag. It is important to replace the bag whenever it becomes full. Do not try to reuse a bag.
9 10 Changing the Belt Warning: Spare parts Always unplug the cord from the outlet when servicing. Power base components: a. Roller b. Roller pulley c. Motor drive shaft d. Belt e. Belt cover lid f. Intake opening The belt should be replaced when necessary, usually once a year. d f e a 2. 3. 3. 4. Troubleshooting Remove the screw which holds the belt cover lid to the unit and place it in a secure location.
11 12 Problem: You smell burnt rubber coming from the Garry™ vacuum Try the following: Make sure the roller brush is not stuck. When the roller brush is stuck and the motor is running, this can cause friction which can cause the belt to overheat. • Turn your Garry™ vacuum off and unplug the machine. • Turn the machine over and check to see if something is clogging the roller (like the end of an area rug) or if the roller is not spinning because it is bound up with hair, string, or carpet fiber.
13 14 ARBITRATION AGREEMENT THIS ARBITRATION AGREEMENT (“AGREEMENT”) AFFECTS YOUR LEGAL RIGHTS AND REMEDIES BY PROVIDING THAT DISPUTES BETWEEN YOU AND THE SELLER OF THIS PRODUCT (“COMPANY”), MUST BE RESOLVED THROUGH BINDING ARBITRATION, RATHER THAN IN A COURT. PLEASE READ THIS AGREEMENT CAREFULLY. YOU ACCEPT THE TERMS OF THIS AGREEMENT BY RETAINING THE PRODUCT(S) SHIPPED IN CONNECTION WITH THIS AGREEMENT (THE “PRODUCT”) FOR MORE THAN FOURTEEN (14) DAYS AFTER RECEIPT.
15 16 NOTES: NOTES: