owner’s guide TPP230-021113 TPP230 uv germicidal air purifier TPP230 uv germicidal air purifier by TPP230M_Mnl_2.13_R1.
Thank you for purchasing the Therapure® 230 air purifier. With UV germicidal protection to reduce germs and permanent HEPA-type filtration to purify the air, the Therapure® 230 air purifier will greatly improve the quality of the air in your home, office or other environments. We want you to be fully satisfied with your Therapure® 230. That’s why your Therapure® 230 comes with a one-year limited warranty.
2 3 SAFETY INSTRUCTIONS IMPORTANT WARNINGS READ AND SAVE THESE INSTRUCTIONS UV Lamp Notice UV Light is harmful to bare skin and eyes and can cause temporary or permanent loss of vision. Never look directly at the UV lamp while it is illuminated; doing so could cause loss of vision! Only view illumination through the window at the front of the unit. To prevent exposure to ultraviolet light, disconnect the power to the unit before servicing any part of the Therapure® 230 air purifier.
5 PRODUCT BENEFITS MAIN PARTS » Quadruple action purification: 1. Locking Latch 2. Air Inlet Grill 3. Permanent HEPA-Type Filter: the permanent filter removes small visible and non-visible particles down to 0.1 microns in size. 4. UV Lamp Cover 5. Control Panel 6. Control Dial: there are 3 speed settings: (low, medium and high) for you to choose from according to the air quality needs in the room. 7.
6 7 OPERATING THE THERAPURE® 230 OPERATING THE THERAPURE® 230 Before using the Therapure® 230 air purifier, please read the following important information. Electrical Ratings: • 120V Setting: 120Vac, 60 Hz • Power consumption: 55 watts (0.5 ampere) at high fan speed, • 3 watt UV light lamp • Net weight: 10.3 lbs. • Dimension (LxWxH): 9.6” x 7.9” x 26.1” Safety 1. Do not place near fans. 2. Keep both sides of the unit at least 1 foot away from a wall. 3 Do not place the unit near curtains. 4.
8 9 OPERATING THE THERAPURE® 230 CLEANING & MAINTENANCE CONTROLS/SETTINGS: Keep the Therapure® 230 functioning properly by cleaning the permanent HEPA-Type Filter every four weeks. More frequent cleaning will be necessary if the unit is located in an area with a high level of airborne contaminants (excessive amounts of smoke, pet dander, etc.). Power Control – To operate the Therapure® 230 air purifier, turn the knob clockwise to turn on.
10 11 CLEANING & MAINTENANCE CLEANING & MAINTENANCE Cleaning External Surfaces 1. Turn off and unplug unit. 2. Use a washcloth slightly dampened with a little water and dishwashing soap to wipe the outer case surfaces. 3. Do not allow water to slip into the internal parts as this could damage your unit and result in electrical shock and injury to you. 4. Allow the unit to thoroughly dry before use. Before replacing the UV lamp, make sure the Therapure® air purifier is turned off and unplugged.
12 13 TROUBLESHOOTING ONE-YEAR LIMITED WARRANTY PROBLEM REASON SOLUTION Unit will not operate. Power button has not been turned on. Press the Power button Unit is unplugged. Check to ensure unit is plugged in. The inlet grill has not been installed & locked into place. Check to make sure filter is properly installed & locked into place. The inlet or outlet grill may be blocked. Check to ensure nothing is blocking air inlet & air outlet.
14 15 ARBITRATION AGREEMENT PLEASE READ THIS AGREEMENT CAREFULLY. YOU ACCEPT THE TERMS OF THIS AGREEMENT BY RETAINING THE PRODUCT(S) SHIPPED IN CONNECTION WITH THIS AGREEMENT (THE “PRODUCTS”) FOR MORE THAN THIRTY (30) DAYS AFTER RECEIPT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, YOU MAY RETURN THE PRODUCT TO COMPANY WITHIN THIRTY (30) DAYS OF RECEIPT FOR A FULL REFUND.
TPP230M_Mnl_2.13_R1.
