Operating instructions

8
Making A Paper Cone
5. Finished paper cone.
1. Place a standard sheet of 8½" x 11"
paper on a flat surface.
2. Lay the plastic cone supplied with
the unit on the 11" side of the paper
and begin rolling the plastic cone
until you reach the other side
of the paper.
3. With the paper totally wrapped
around the plastic cone, take a piece
of tape and tape the loose paper
edge down.
4. With your finger, push the small end
of the plastic cone up until you can
grab the large end of the plastic
cone and pull until it is completely
removed.