Owner`s manual
16
7.  INSTALLATION ON FACEPLATE: Attach the mitred corners of trim together using 
the corner brackets. Slide the assembled trim over the edge of the faceplate. See Figures 
8 and 9. 
Attach the left and right sides to the top with corner brackets supplied. Slip the trim over 
the faceplate and snap the eight faceplate trim clips in place (see Figure 8). 
Figure 8 
Figure 9 
8.  Lift the insert into the fireplace. Square the insert to the face of the fireplace by 
adjusting the levelling legs on the sides at the rear of the insert. Check that the throat 
connector is in line. 
9.  If there is space to push the connector down from above, do so. Reach in through 
the insert and pull the throat connector down into place. If you are securing the connector 
to the flue collar with the screw, do that now. 










