Owner`s manual

Initial Installation

QUALIFIED INSTALLERS ONLY

MANTLE CLEARANCES:

It is not necessary to install a mantle, but if one is desired it is important to follow the guidelines. The Manor face

has a different set of clearances than the other faces.

8in mantle

in mantle

8in mantle

Figure 14. Combustible Mantle (inches)

Clearances for The Manor

Figure 13. Combustible Mantle Clearances

(inches)

VENT PARTS AND TERMINAL CLEARANCES:

The Sherwood Home Collection of replaces have been tested and certied for use with SIMPSON DURAVENT

TYPE GS PIPE FOR GAS STOVES. SECURITY CHIMNEY’S “SECURE VENT DIRECT VENT SYSTEM” and SELKIRK

“METALBESTOS MDV VENT SYSTEM” kits are available for horizontal venting. When using Simpson Duravent, it is

recommended that, before installation, a bead of RTV High Temperature Silicone should be applied to each outer

SIMPSON DURAVENT (SD) and METALBESTOS (M), must state if galvanized or black wanted, PART NUMBERS:

SD M Description SD M Description

908 1604006 6” pipe length 943S Flashing, 7/12 to 12/12 roof pitch

907 1604009 9” pipe length 953 1604810 Storm collar

906 1604012 12” pipe length 963 1604500 Fire stop

904 1604024 24” pipe length 988 1604430 Wall support

903 1604036 36” pipe length 984 Horizontal square termination

902 1604048 48” pipe length 971 1604621 Horizontal termination kit A

911 11” to 14

/8” pipe, adjustable, black 980 Vertical termination

1604082 4”-10” pipe , adjustable 991 1604802 High wind vertical termination

945 1604215 45° elbow, black 985 1604804 High wind horizontal termination

990 1604230 90° elbow, black 1604808 Vinyl siding shield plate

1604825 Flashing, 0/12 to 6/12 roof pitch 950 1604806 Vinyl siding standoff

1604830 Flashing, 6/12 to 12/12 roof pitch 942 1604460 Wall thimble

943 Flashing, 0/12 to 7/12 roof pitch