Owner`s manual

Secondary Installation
Figure 29: Shows the back log plus the two small
log twigs. Put the large back log in rst, making
sure the locator pins line up with the cutout sections
on the log. There are two pins with ledges and a
single ledge on the back log. The back log sits on
two supports attached at the rear of the rebox.
The two small twigs are placed under the grate and
they should be rotated so they cover up the least
number of small burner ports.
Figure 30: Shows the left/center log in place. The
left/center log is placed on the other two pins
connected to the burner pan and the straight part
rests on the grate connecting the andirons. There
are notches on the bottom of the left/center log to
help position the log correctly.
Figure 31: The right log rests on the right pin and
ledge of the back log and the oor of the rebox.
Figure 29: First Stage Log Set Installation.
Figure 30: Second Stage Log Set Installation.
LOG SET ASSEMBLY:
24
Figure 31: Third Stage Log Set Installation.