Indoor Fireplace User Manual

Mount the two framing mount brackets on each side and secure the
replace to framing with screws or nails (refer to Figure 16). The brackets
will allow for a ” (13 mm), ” (16 mm), ” (19 mm) thick nishing
wall. The wall may be nished up to the replace facing with combustible
material.
Figure 16. Nail Tab.
Initial Installation
QUALIFIED INSTALLERS ONLY
FRAMING MOUNT BRACKETS:
CORNER INSTALLATION:
The dimensions for installing a replace in the corner of a room are given in Figures 17 and 18. Refer to
“INITIAL INSTALLATION - VENT CONFIGURATIONS AND RESTRICTOR SETTINGS” for allowable pipe lengths.
Do not interfere with the structural integrity of the walls.
Outside Wall
(Thick)
Inside
Wall
23
7
/ 8 ”
(605mm)
5
5
/ 8 ”
(143mm)
36
1
/ 4 ”
(920mm)
47
5
/ 8 ”
(1210mm)
33
3
/ 4 ”
(856mm)
15
1
/ 2 ”
(393mm)
11”
(279mm)
Figure 17. Dimensions for a corner installation, rear
vented.
15
Figure 18. Dimensions for a corner installation, top
vented.
RAISED FIREPLACES AND HEARTHS:
Figure 20. Raised Fireplace with Floor Level Hearth
Figure 19. Raised Fireplace with Raised Hearth