Installation manual

TYPICAL THROUGH WALL OUTSIDE TERMINATION INSTALLATION.

TO SUPPLY POWER TO THE EXHAUST BLOWER:

Install an amour coated electrical cable from the exhaus

blower housing, through the wall thimble and attach to the pre

drilled hole in the left hand rear hopper pillar, and hook up to

wires from the wiring harness for exhaust blower

ll electrical connections must be in accordance to local code

requirements.

EF V EVOLUTION

90° DEGREE ELBOW

45° DEGREE ELBOW WITH

RODENT SCREEN OR

STAINLESS STEEL

TERMINATION HOOD

2 FOOT RISER

PIPE ADAPTER

EXTERIOR BLOWER AND

HOUSING

ELECTRICAL CABLE

SIDE VIEW

NOTE:

Ensure that all vent

connections be installed

by placing a small bead

of high temperature

silicone at each chimney

connection.

Also ensure that all

vertical vent sections are

proper supported and

the all clearances to

combustibles are

maintained in

accordance with the vent

manufacturer’s

specifications.

WALL STRAP