Specifications

12
Figure 11: Corner Installation.
CORNER THROUGH WALL INSTALLATION:
Installation
MOBILE HOME INSTALLATION:
● Secure the heater to the floor using the two
holes in the pedestal.
● Ensure the unit is electrically grounded to
the chassis of your home (permanently).
● Do not install in a room people sleep in.
● Outside fresh air is mandatory. Secure
outside air connections directly to fresh air
intake pipe and secure with three screws
evenly spaced.
CAUTION: THE STRUCTURAL
INTEGRITY OF THE MANUFACTURED
HOME FLOOR, WALL AND CEILING/
ROOF MUST BE MAINTAINED.
Figure 10: Mobile home installation.
ENVIRO P3
1
/4” Lag Bolts
Securely Fastened
Ground Wire Directly
to Metal Chassis
Hearth Pad
Flooring
Steel Frame
3" (75mm)
3"
(75mm)
Wall thimble
manufactured
by pellet vent
manufacturer.
Minimum clearances must be maintained
for a corner installation as shown in
figure 11.