Specifications

Installation

THROUGH WALL WITH EXTERIOR BLOWER KIT INSTALLATION - HORIZONTAL TERMINATION:

Electrical Cable

90° Elbow

45°Elbow with Rodent

screen or stainless

steel termination hood

2ft (610mm) Riser

Pipe Adaptor

Exterior Blower

and Housing

Wall Strap

To supply power to

the exhaust blower

Install the amour coated electrical cable from the exhaust blower housing, through the wall thimble plate and

attach to the pre drilled hole in the left hand rear hopper pillar. Hook up to wires from the exhaust blower wiring

harness.

All electrical connections must be in accordance to local code requirements

NOTE:

Ensure that all interior vent connections are sealed by placing a small bead of high temperature silicone around

each chimney connection.

Also ensure that all vertical vent sections are properly supported and that all clearances to combustibles are

maintained in accordance with the vent manufacturer’s specifications.

Figure 23: Through Wall Installation with Exterior Blower Kit.

Figure 24: Through W

all Installation with Exterior Blower Kit; Side View.