Owner`s manual

Figure 7: Mobile Home Install Mounting.
mobiLe home inStaLLation - fReeStanDing:
● Secure the heater to the floor using the holes in the pedestal of the appliance.
● Ensure the unit is electrically grounded to the chassis of your home (permanently).
WARNING: Do not install in a room people sleep in.
CAUTION: The structural integrity of the manufactured home floor, wall and ceiling/roof
must be maintained
• Outside fresh air is mandatory. Secure outside air connections directly to fresh air intake pipe and
secure with three (3) screws evenly spaced.

9
cLeaRanceS to combuStibLeS - fiRePLace inSeRt:
The fireplace insert must be installed into a masonry fireplace. This model includes a surround faceplate
and a pedestal.
From the body of the heater to the side wall: 9 inches minimum
From the body of the heater to the Facing on masonry fireplace: 8 inches minimum
From the body of the heater to the 10” (203 mm) mantle: 8 inches minimum
Ground wire directly
connected to metal chassis.
Hearth Pad
Flooring
Steel Frame
1
/4 " Lag bolts
securely fastened