Specifications

OIL PURIFICATION SYSTEMS, INC.
Enviro-Pur is a trademark of Oil Purification Systems, Inc. Copyright © 2010, Oil Purification Systems, Inc. All Rights Reserved.
Page 6
Hose Specifications (Supplied):
Supply line:
 ¼” reinforced nitrile hose with an operating temperature of -40
o
F to 212
o
F designed
to be used with field installable fittings
Return line:
 ¼”reinforced nitrile hose with an operating temperature of -40
o
F to 212
o
F designed
to be used with field installable fittings
Note: If using pre-fabricated hose assemblies, #4 JIC female swivel connections are
required at each end of the ¼” hose assembly. The same is true for the ¼” return
line as well.
______________________________________________________________________
Connecting to the Supply Line
Connecting to the selected supply source will require replacing a plug with an adapter,
or another combination of fittings that will provide a #4 JIC male termination for
connecting the supply line. A #4 JIC termination is also provided on the Enviro-Pur unit
for the opposite end of the supply.
Once the proper fittings have been installed, measure the distance between them by
running a tape measure along the intended route for the hose. Add a few inches to the
measured length to accommodate vibration, movement, and hose-bend radius. Use
cable ties to secure the lines and to minimize chafing and wear.
______________________________________________________________________
Connecting the Oil Return Line
Connecting to the selected return location will require replacing a plug with an adapter,
or another combination of fittings that will provide a #4 JIC male termination for
connecting the supply line. A #4 JIC termination is also provided on the Enviro-Pur unit
for the opposite end of the supply.
Use cable ties to secure the lines and to minimize chafing and wear.
______________________________________________________________________