Datasheet

Page40of43
f. IntheHHMdisplay,wherealisteddeviceisarouter,totherightofthatdevicewillbea
numberwhichdenotesthenumberof“children”therouterhas.
g. Using the HHM, observe the link quality for the new router to the receiver.
If the link is
shownasgood,proceedtostep11h.Ifthelinkqualityisshownasmarginal,selectthenew
routerandthennavigateto“Verification”ontheHHMmenu.PresstheOKkeytoforcethe
newrouterintoverificationmode.Thenodewillgoofflinefor
ashortperiod,thenrejoinin
verificationmode.Therouterwillnowtrytofind abettercommunicationspath backtothe
receiver via another router, if there is one already installed. Note the link quality and the
positionoftherouter.Itisrecommendedthatadrawingor
floorplanbeusedtomarkdevice
positions.
h. UsingtheHHM,selectthenodeandthennavigateto“Verification”ontheHHMmenu.Press
theOKkeytoforcethenewnodeintoverificationmode.Thenodewillgoofflineforashort
period,thenrejoin inverification
mode.Notethelinkqualityandtheexact positionof the
router.
i. Where a router or node has been placed into verification mode, it must be returned to
normal operating mode by resetting or power cycling prior to moving to step 12. If left
unattended for more than 5
minutes, a router or node placed into verification mode will
automaticallyreturntonormalmode.
12. Continue placing battery powered sensor nodes (and routers if required), until battery powered
sensornodeshavebeentestedattherequiredpoints,goodqualitylinksareshownforalldeviceson
theHHM,andcomplete
coverageisdemonstrated.
13. Whenconfigurationiscomplete,savethemapdisplaylayout(seepage39).
14. Generateareportofthecompletednetworktodocumentitforfuturereference(seepage40).