Datasheet

Page41of43
BestPractisePoints:

1. Alwaysconductasitesurvey,andensurethatifyouplantouseanexternalextensionaerial
onthe system receiver (for example, ifthe receiver is to be in a metal panel), you use the
same external extension aerial on the SSK receiver for the survey. Document the
survey
thoroughly,andleaveacopyonsite.
2. When planning where routers are going to be needed, plan for “redundancy”, i.e. what
happens to all the EDs connected to a router if the router fails? Backup routers are worth
considering.Seepages11‐13.
3. Generally speaking, wireless works best
in a horizontal plane, so expect reduced signal
strengthifhereceiverisonadifferentfloortotherouters/EDs.Agoodruleofthumbishave
thereceiveronthesamefloorasit’schildren,thoughthisisn’talwaysthecase.
4. 2.4GHz wireless signals don’t go through metal!
Plan to circumvent metal obstructions
wherepossible.
5. Iftheinstallationenvironmentisonewhereobstructionsarelikelytochangeregularly (ina
warehouse,forexample!),trytoconductthesitesurveyundera“worstcase”scenario‐i.e.
assume that atsome point, there’s going to be an obstruction between the
ED/router and
it’sparentatsometime.Simulateit,ifpossible.
6. Rememberthatwhenareceiverscansall16channelsforthebestone,thechannelchosenis
the best where the receiver is. On “long” networks with several “layers” of routers, the
channel chosen by the receiver may
not always be the quietest at the far end of the
network.Whenthe installed network is finally formed,pressthe receiver reset button and
ensure the network reforms properly. This will ensure that, in the event that the receiver
needstochangechannels(forexample),itwillworkseamlessly.
7. Aseachnetworkiscommissioned,savethelayout ‐evenifthereisn’tabackgroundgraphic
loaded.Thisisagoodaidtoquicklyviewingnetworktopology.
8. Documenteach network! In CMS, rightclick on the receiver in the hierarchical display and
select“PrintPreview”fromthemenuand
print(topaperorafile,suchas.PDF)thepreview
document.Thisgivesareferencetocallonatalaterdateifrequired.