Instructions / Assembly

ManualsBrandsEnviroLite ManualsLighting4 in. 3000K White Integrated LED Recessed Baffle Trim

WARNING - RISK OF ELECTRIC SHOCK. DISCONNECT MAIN

POWER AT FUSE OR CIRCUIT BREAKER BEFORE

INSTALLING OR SERVICING THE FIXTURE.

LED 5” & 6” RETROFIT TRIM

INSTALLATION INSTRUCTIONS

MODELS EVL6730N & EVL6733N

QUESTIONS? CALL TOLL

FREE 1-855-573-6156

Please read carefully and save these instructions as

you may need them at a later date.

GENERAL: All electrical connections must be in accordance with local

and National Electrical Code (N.E.C.) standards. If you are unfamiliar

with proper electrical wiring connections obtain the services of a

qualified electrician.

Remove the trim from the box and make sure that no parts are missing

by referencing the PARTS illustrations.

THIS RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF

A LED LUMINAIRE WHERE THE SUITABILITY OF THE

COMBINATION SHALL BE DETERMINED BY CSA OR CANADIAN

AUTHORITIES HAVING JURISDICTION.

_________________________________________________

WARNING- RISK OF FIRE OR ELECTRIC SHOCK

FOR USE WITH HOUSING MODELS: INCANDESCENT HOUSINGS –

COMMERCIAL ELECTRIC HBR5ICAT, HBR5ICRAT, HBR5, HBR5R,

HALO H5T, H5RT, H5ICT, H5RICAT, C7IC, C7ICR, C7ICA, C7ICRA,

C7, C7R, C7S, HBR5000SIC; HALO H7ICT, H7RICT, H7ICAT,

H7RICAT, H7T, H7RT, H27ICT, H27T, H27RT, H750ICAT, H750RICAT;

CORDELIA X5LICAT, X5LICRAT, HBR7LICAT, HBR7LICRAT; CAPRI

CR1, CRR1; DMF DH6ICATQ, DH6ICRATQ; ELCO EL5ICA, EL5RICA;

LITHONIA L5, L5R, EL7ICA, EL7RICA; ELITE B5, B5R, B5IC, B5RIC,

B6IC, B6RIC; JUNO IC22, IC22R; LITHONIA L7X, L7XR; NORA NHIC-

17QAT, NHRIC-17QAT; PROGRESS P187-TG, P87-AT, P184-TG,

P84-AT; SEA GULL 11018, 11028; THOMAS PS1, PS1-RM. HALO

LED HOUSINGS – H550ICAT, H550RICAT H750ICAT, H750RICAT.

• Do not alter, relocate, or remove wiring, lampholders, power supply,

or any other electrical component. Installation of the retrofit

assembly requires a person familiar with the construction and

operation of the luminaire’s electrical system and the hazard

involved. If not qualified, do not attempt installation. Contact a

qualified electrician.

• Do not make or alter any open holes in an enclosure of wiring or

electrical components during kit installation.

• To prevent wiring damage or abrasion, do not expose wiring to

edges of sheet metal or other sharp objects.

____________________________

ASSEMBLY AND INSTALLATION

1. If the installed housing does not have TORSION SPRING SLOTS

or C-CLIPS (FIG. 4) then remove the SCREWS securing the

TORSION SPRINGS to the HEATSINK. Attach the FRICTION

BLADES (included) to the same location using the SCREWS that

were previously removed. (FIG. 1)

2. If using a 5 inch housing, loosen the screws on the TORSION

SPRINGS (and slide the brackets inward. Re-tighten screws to

secure TORSION SPRINGS in place. (FIG. 2)

INCANDESCENT HOUSINGS

1. Unscrew the WING NUT inside the CAN to detach the SOCKET

BRACKET from the CAN. Disengage the SOCKET from the

SOCKET BRACKET. (FIG. 3)

2. Thread the SOCKET ADAPTER into the SOCKET. (FIG. 4)

PARTS

SOCKET ADAPTER ASSEMBLY

RETROFIT TRIM

COMPATIBLE HOUSING

DIMENSIONS

5 in. – 7 in.

5 in. – 6 in.

Summary of content (6 pages)

PAGE 1
LED 5” & 6” RETROFIT TRIM INSTALLATION INSTRUCTIONS MODELS EVL6730N & EVL6733N Please read carefully and save these instructions as you may need them at a later date. QUESTIONS? CALL TOLL FREE 1-855-573-6156 WARNING - RISK OF ELECTRIC SHOCK. DISCONNECT MAIN POWER AT FUSE OR CIRCUIT BREAKER BEFORE INSTALLING OR SERVICING THE FIXTURE. PARTS GENERAL: All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards.
PAGE 2
1. Plug the MALE CONNECTOR of the SOCKET ADAPTER to the FEMALE CONNECTOR of top of the RETROFIT TRIM. (FIG. 5) 3. If using TORSION SPRINGS, squeeze both TORSION SPRING arms together and insert into the TORSION SPRING SLOTS (or C-CLIPS) of the CAN. (FIG. 6A) 5. Tuck all wires into the CAN and carefully push the RETROFIT TRIM into CAN.
PAGE 3
INSTRUCCIONES PARA LA INSTALACIÓN DEL ADAPTADOR DECORATIVO LED DE 5” y 6” MODELO EVL6730N Y EVL6733N Lea cuidadosamente y guarde estas instrucciones ya que podría necesitarlas más adelante. GENERAL: Todas las conexiones eléctricas deben realizarse conforme a las normas locales y al Código Eléctrico Nacional (N.E.C. por sus siglas en inglés). Si no está familiarizado con las conexiones adecuadas de cableado eléctrico obtenga los servicios de un electricista calificado.
PAGE 4
1. Enchufe el CONECTOR MACHO del adaptador del PORTALÁMPARAS al CONECTOR HEMBRA en la parte superior del ADAPTADOR DECORATIVO. (FIG. 5) 4. Si usted está usando las ABRAZADERAS, apriete las ABRAZADERAS e inserte en las RANURAS (o RECEPTOR DE ABRAZADERA) de el PORTALÁMPARAS. (FIG. 6A) 5. Mete todos los cables en el PORTALÁMPARAS y empuje con cuidado la reconversión ADAPTADOR DECORATIVO en PORTALÁMPARAS.
PAGE 5
MODE D’INSTALLATION POUR GARNITURE DE DES QUESTIONS? RÉNOVATION AVEC MODULE DEL DE 12,70 et 15,24 APPELEZ SANS FRAIS AU CM - MODÈLES EVL6730N ET EVL6733N 1-855-573-6156 Veuillez lire ces instructions attentivement et les conserver pour pouvoir les consulter au besoin. GÉNÉRALITÉS: Tous les raccordements doivent être effectués conformément aux exigences des règlements locaux et du code national de l’électricité (CNE).
PAGE 6
1. Branchez le CONNECTEUR MÂLE de le SUPPORT ADAPTATEUR au CONNECTEUR FEMELLE du haut de la GARNITURE DE RÉNOVATION. (FIG. 5) 3. Si vous utilisez des RESSORTS DE TORSION, serrez les deux pattes à RESSORTS DE TORSION l’une contre l’autre et insérez-les dans les FENTES DE RESSORT DE TORSION (ou SUPPORTS DE RÉCEPTION) du BOÎTIER. (FIG. 6A) 4. Rentrez tous les fils dans le BOÎTIER et poussez doucement la GARNITURE DE RÉNOVATION dans le BOÎTIER.