Installation Guide

 Turn on power at the circuit breaker or fuse box.

 Turn the light switch on to activate the fixture.

OPERATION

NOTE: Do not use any cleaners

with chemicals, solvents, or harsh

abrasives. Use only a dry soft

cloth to dust or wipe carefully.

EXTERIOR MAINTENANCE

 Use a dry or slightly dampened

clean cloth and wipe the surface

of the fixture.

INTERIOR MAINTENANCE

 Disconnect power to the fixture by turning off the circuit breaker or by

removing the fuse at the fuse box.

 Use a dry or slightly dampened clean cloth to wipe the interior surface of the

fixture.

CARE & CLEANING

DRIVER REPLACEMENT

 This product is ENERGY STAR ®

listed. The driver can be replaced

without having to cut wires. Please

contact a qualified electrician if

driver replacement is needed.

Class 2 Power Supply | Dry or Damp Location Only

CAUTION

DISCONNECT LINE VOLTAGE BEFORE INSTALLING

OR REPLACING. CASE MUST BE GROUNDED.

VEL19090120HDA-1

In: 23 W, 0.23 A

Out: 15-21 V, 900 mA

PF: >0.90

CONSTANT CURRENT

Dimmable LED Driver

120V 60Hz

RoHS

E339538

Santa Fe Springs, CA

www.espentech.com

V2 Toll Free 1-866-933-7736 Made in China

W Red

B Yel

N +

L –