Installation Guide

CAUTION:

1. Before starting installation of this fixture or removal of a previous fixture, disconnect

the power by turning off the circuit breaker or by removing the fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL

QUESTIONS. If you have any non-electrical questions about this fixture, please call

our Customer Service Team at phone# on carton label.

3. KEEP your receipt and these Instructions for Proof of Purchase.

GENERAL:

1. All electrical connections must be in accordance with local, and national electrical

codes.

2. Prior to installation it is important to follow the following guidelines:

A. Turn off the main power at the circuit breaker before installing the fixture, to

prevent possible shock.

B. Be sure that all wires were not damaged during installation and that there are no

rough or sharp edges in contact with the wires.

WARNING:

 Min 75°C supply conductors, Type IC, INHERENTLY PROTECTED.

 This product must be installed in accordance with the applicable installation code by a

person familiar with the construction and operation of the product and the hazards

involved.

 Blinking light of this thermally protected luminaire may indicate overheating.

 Vapor barrier must be suitable for 75°C.

 Suitable for damp locations.