Installation Guide

INSTALLATION & ASSEMBLY:
1. Turn off the power at the circuit breaker box.
2. Remove the fixture from the packaging.
3. Rest the luminaire on the T-Bar of the ceiling
suspension system in the desired location. [Fig. 1]
4. From above the ceiling, secure the Troffer to T-Bar
by bending built in hooks (#1) on all four corners of
the fixture. [Fig. 2]
5. If local code requires, tie a wire to at least two of
the four hooks (#1) located near each corner of the
Troffer to a structural member of the ceiling. [Fig. 2]
6. Remove the access plate (#2) located on the back
of fixture and locate one black and one white
fixture supply wires. [Fig. 3]
7. Remove a knockout in the access plate (#2).
[Fig. 3]
8. Thread the power supply wires through the
knockout hole in the access plate (#2). [Fig. 3]
9. Connect the black fixture wire to the black (+)
supply wire using a wire nut. Connect the white
fixture wire to the white supply wire (-) using the
a wire nut. Connect the supply ground wire to the
fixture ground wire using a wire nut. [Fig. 4]
10. Restore power at the circuit breaker box.
WIZ APP:
1. Download the free WiZ app from the Apple Store or
Google Play.
2. Connect your device (phone or tablet) to 2.4 GHz of
your Wi-Fi router.
3. Follow the pairing process in the app.
4. For additional details visit wizconnected.com.
3
Fig. 4
Fig. 2
Fig. 1
Fig. 3
FIXTURE SUPPLY
WIRES WIRES
BLACK BLACK
WHITE WHITE
GROUND GROUND