Instructions / Assembly

ManualsBrandsEnviroLite ManualsCommercial Lighting319-Watt 4 ft. White Integrated LED Backlit High Bay Hanging Light with 41,243 Lumens, 5000K

____________________________

ASSEMBLY AND INSTALLATION

1. Remove the screw (A) near the access plate (B)

located on the back of the fixture. [Fig. 1]

2. Punch out one of the knockouts (C) in the wire

cover (B). [Fig. 1]

3. Open the access plate (B) and thread the

supply wires through the knockout (C). Insert

the supply wires into the quick connector (D)

aligning the black supply wire with the black

fixture wire and the white supply wire to the

white fixture wire. [Fig. 2]

4. If the fixture will be connected to a dimmer, punch

out one of the knockouts (E) located around the

back portion of the fixture and pull the dimming

wires out through that knockout (E). [Fig. 3]

5. Place the access plate (B) back onto the fixture

and secure it with the screw (A) that was

previously removed. [Fig. 1]

6. Hook the hangers into the oblong holes in the

back of the fixture and through the round holes

on the end of the fixture. [Fig. 4]

________

DIMMING

1. Insert the purple dimming wire into the quick

connecter with the purple fixture wire. Insert

the grey dimming wire into the quick

connector with the grey fixture wire. [Fig. 5]

For up-to-date list of compatible dimmers, look

up the model number at envirolte-LED.com.

HB4B42DMDP50

4FT LED HIGH BAY, 41000 LUMEN, 5000K,

0-10V DIMMING, MV, DLC PREMIUM

INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions. Failure to do so may lead

to electrical shock or fire, which may cause injury or death.

For questions, problems, or missing parts call the Customer Service line at

(855) 573-6156 from 8 AM to 6 PM EST Monday – Friday.

________

CAUTION

WARNING – RISK OF FIRE: Turn off the main power at the circuit breaker

before installing the fixture or performing other maintenance in order to

prevent possible shock.

_________

GENERAL

All electrical connections must be in accordance with local, and national

electrical codes.

Prior to installation remove all protective plastic film covering from the fixture.

Tools needed for installation: Phillips screwdriver, wire strippers, and

pliers.

Fig. 2

Fig. 1

Fig. 3

Fig. 5

Fig. 4

Summary of content (3 pages)

PAGE 1
____________________________ ASSEMBLY AND INSTALLATION 1. Remove the screw (A) near the access plate (B) located on the back of the fixture. [Fig. 1] 2. Punch out one of the knockouts (C) in the wire cover (B). [Fig. 1] HB4B42DMDP50 4FT LED HIGH BAY, 41000 LUMEN, 5000K, 0-10V DIMMING, MV, DLC PREMIUM INSTALLATION INSTRUCTIONS Please read carefully and save these instructions. Failure to do so may lead to electrical shock or fire, which may cause injury or death.
PAGE 2
_______________________ MONTAJE E INSTALACIÓN 1. Retire el tornillo (A), cerca de la placa de acceso (B) situado en la parte posterior del luminario. [Fig. 1] 2. Perfore una de las entradas (C) en la placa de acceso (B). [Fig. 1] HB4B42DMDP50 ALTA BAHÍA LED DE 4 PIES, 41000 LUMEN, 5000K, ATENUACIÓN DE 0-10V, MV, DLC PREMIUM INSTRUCCIONES DE INSTALACIÓN Por favor lea atentamente y guarde estas instrucciones.
PAGE 3
_____________________________ ASSEMBLAGE ET INSTALLATION 1. Retirer la vis (A) près de la plaque d‘accès (B) située à l’arrière de le luminaire. [Fig.1] 2. Découper un des entrées (C) dans la plaque d‘accès (B). [Fig.1] 3. Ouvrez la plaque d‘accès (B) et passer les fils d’alimentation par le entrée (C). Insérer les fils d’alimentation dans le connecteur rapide (D) en alignant le fil d’alimentation noir avec le fil noir de luminaire et le câble d’alimentation blanc avec le fil blanc de luminaire. [Fig.