Installation Guide

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 Shade
1 Fixture Body
1 Top Loop
3 Screws
GENERAL:
1. All electrical connections must be in accordance with local, and
national electrical codes.
2.
Prior to installation it is important to follow the following guidelines:
2.
Prior
to
installation
it
is
important
to
follow
the
following
guidelines:
A. Turn off the main power at the circuit breaker before installing the
fixture, to prevent possible shock.
B. Be sure that all wires were not damaged during installation and
that there are no rough or sharp edges in contact with the wires.
WARNING:
• This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
operation
of
the
product
and
the
hazards
involved.
• Suitable for wet locations.