Installation Guide

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 Luminaire
5 Wire Nuts 4 Anchor
Screws
2 Mounting
Screws
4 Anchors
GENERAL:
1. All electrical connections must be in accordance with local, and
national electrical codes.
2
Prior to installation it is important to follow the following guidelines:
2
.
Prior
to
installation
it
is
important
to
follow
the
following
guidelines:
A. Turn off the main power at the circuit breaker before installing the
fixture, to prevent possible shock.
B. Be sure that all wires were not damaged during installation and
that there are no rough or sharp edges in contact with the wires
that
there
are
no
rough
or
sharp
edges
in
contact
with
the
wires
.
3. This light is dimmable. It requires a 0-10 volt dimmer. For up-to-date
list of compatible dimmers, go to www.envirolite-LED.com
.
4. Suitable for damp locations.
5. CAUTION – RISK OF FIRE: This product must be installed in
accordance with the applicable installation code by a person familiar
with the construction and operation of the product and the hazards
involved.