Heavy Duty LE Rotator Operation & Instruction Manual Call 800.343.5319 or 843.881.6560 • www.environmentalexpress.
Heavy Duty LE Rotator: Operation and Instruction Manual Dear Valued Customer, Thank you for purchasing a Heavy Duty LE Rotator from Environmental Express. We pride ourselves on providing innovative products designed to improve accuracy, efficiency, and safety in your laboratory. Please take some time to read your product manual before using your Rotator.
Heavy Duty LE Rotator: Operation and Instruction Manual General Information Congratulations on the purchase of your Heavy Duty LE Rotator from Environmental Express. The well-designed Heavy Duty LE Rotator delivers quiet, consistent and dependable service. Large 6.25" x 6.25" x 12.75" stainless steel compartments accommodate most zero headspace extractors and many styles of glass and plastic bottles. The box style design offers a greater degree of safety than other styles of rotators.
HotBlock: Operation and Instruction Manual General Information Accessories Extractor Pads are available to fit both Zero Headspace Extractors and a variety of bottles. Polyurethane Extractor Pads for LE Rotators are die-cut to enable various vessels to fit in the Environmental Express LE rotators. Also available is the foam rubber collar to allow bottles to fit in clamp style rotators (catalog BW2000A).
Heavy Duty LE Rotator: Operation and Instruction Manual General Information Heavy Duty LE1002/LE1003 Rotator Product Warranty The Environmental Express Heavy Duty LE Rotators are warranted against defects in materials and workmanship, when used in accordance with applicable instructions for the period of one year from the date of shipment. This warranty extends to parts and labor, applies only to damage or failure caused by normal laboratory use and is limited to product repair.
Heavy Duty LE Rotator: Operation and Instruction Manual Safety Information Safety Information Please read this manual carefully. It contains valuable information that will prevent damage to the machine and/or serious bodily injury to personnel. WARNING!!! • Always stay clear of rotating parts! • Failure to read and practice these safety precautions could result in serious damage to equipment and/or cause serious bodily injury to operating personnel.
Heavy Duty LE Rotator: Operation and Instruction Manual Setup and Operation Placement of Your LE Rotator: It is important that your rotator is situated in a safe, cool and dry environment. The rotator weighs in excess of 172 pounds. With this in consideration, a solid structure such as a counter top is an ideal location. If a sturdy counter top is not available place the unit directly on the floor.
Heavy Duty LE Rotator: Operation and Instruction Manual Rotator Assembly Drawing LE Rotator See Detail Drawings A & B, Page 7 Detail A Detail B Side View LE Rotator Parts 1 Extractor Box 2 Belt Guard 3 Rotator Frame 4 Motor 5 Drive Chain 6 Circuit Breaker Switch 7 Leveling Feet 8 Power Cord continued page 7 800.745.8218 / 843.576.1147 / www.environmentalexpress.
Heavy Duty LE Rotator: Operation and Instruction Manual Detail A Rotator Assembly Drawing LE Rotator Parts, continued 9 15 Tooth Sprocket 10 3/4" Flange Bearing 11 3/8" - 16 Socket Cap Screw 12 12 - 10 3/4" Taper Lock Bushing 13 5/16" - 18 Socket Cap Screw 14, 15 5/16" - Flange Nut Detail B 800.745.8218 / 843.576.1147 / www.environmentalexpress.
Heavy Duty LE Rotator: Operation and Instruction Manual Wiring Schematic Wiring Schematic (shown for single phase 120VAC) Maintaining proper chain tension: The chain needs to be inspected routinely to maintain proper chain tension. If the chain develops 1/4" or more of slack it should be tightened using the procedure below. Steps to loosen chain: 1. Loosen the jam nuts using a 7/16" wrench. 2.
Heavy Duty LE Rotator: Operation and Instruction Manual Troubleshooting Your Rotator Heavy Duty LE Rotator Troubleshooting Guide: The unit is plugged into the wall outlet, the switch is on but nothing happens. Is the wall outlet “hot”? 1. Check the breaker box and try plugging another electrical device into the outlet to see if it works. Does the switch on the unit light up? If not, the internal circuit breaker may have tripped. The motor runs but the box does not rotate. 1.