You are about to install a product that is designed to outlast the life-cycle of the building. Once installed the unit will operate continuously for 7 years and beyond without a major service. Please therefore ensure that this product is treated with care and installed properly i.e. for the life of the building. If the unit is mishandled you might break it! This invalidates the warranty. And remember, if you have any problems please call our dedicated Technical Team.
FILTERLESS INFINITY FAN This fan is designed for easy cleaning and long life. Keep this user guide handy. The fan has been set by the installation engineer to suit your kitchen or bathroom application. Your EnviroVent Filterless Infinity Fan has been designed to improve air quality and reduce humidity levels in kitchens and bathrooms to help resolve the condensation and mould problems which can effect dwellings in winter.
FILTERLESS INFINITY FAN INSTALLATION INSTRUCTIONS IMPORTANT SAFETY AND RECOMMENDATIONS Be sure to have read and understood these instructions before beginning the installation process. All wiring must comply with Building Regulations and the current IEE Wiring Regulations 17th edition (BS7671) or the equivalent standards for your country. The final installation should be examined and tested by a qualified electrician.
FILTERLESS INFINITY FAN INSTALLATION INSTRUCTIONS Cable gland Avoid cable entry into shaded areas NO CABLES 10. Fix front cover (Fig.1). Ensure that the pullcord nestles into groove. N.B. Fan will not operate unless front cover is in position. Alternative fixings 100mm ducting (Ø106) Fig.1 125mm ducting (Ø131) Wall fixings Cable gland NOT TO SCALE - FOR GENERAL INFORMATION ONLY 1. oosen the two plastic screws and remove L front cover. (Fig 1.) 2.
FILTERLESS INFINITY FAN MAINTENANCE All repair, maintenance and component replacement is carried out simply and quickly by exchanging the plug out/plug in central cartridge. The worn out cartridge can then be returned to the EnviroVent factory to be recycled/reworked.
FILTERLESS INFINITY FAN TROUBLESHOOTING • • • • • • • • Check feed/power supply Have you checked connections (green male/female connector)? Have you removed printed circuit board for any reason? Is the cartridge correctly seated (no stray wires trapped)? Does the impeller spin freely (check click)? Is the front cover in place? Does the pullcord activate freely? If you still experience difficulties then please call our hotline on 07540 050 147 AFTER SALES SERVICE We recommend that you do not dismantle or
FILTERLESS INFINITY FAN TECHNICAL SPECIFICATIONS Duty (l/s) Power (W) Sound dB(A) @ 3M 15 2 30.8 35 7 36 60 25 46.
FILTERLESS INFINITY FAN WARRANTY CONDITIONS AND EXCLUSIONS The EnviroVent Filterless Infinity Fan is covered by a full 7 year warranty which will benefit the occupier over many years. There is no requirement for any maintenance within the first 7 year period.
Please read carefully to ensure simple installation and a long trouble free life for the user. AFTER INSTALLING THIS FAN PLEASE PASS ONTO END USER - DO NOT THROW AWAY EnviroVent Ltd EnviroVent House Hornbeam Business Park Harrogate HG2 8PA T 01423 810 810 F 01423 810 910 E info@envirovent.com www.envirovent.com E&OE | MKT ENV276-V2-28.03.14 Due to our policy of continuous innovation and improvement EnviroVent reserves the right to alter products specification and appearance without notice.