User guide

SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL
07540 050 147
FILTERLESS INFINITY FAN
IMPORTANT
Be sure to have read and understood these
instructions before beginning the installation
process.
3amp fuse only
This fan operates on 12 Volts D.C.
DO NOT CONNECT TO MAINS, the fan must be
connected to the SELV (12V D.C) power supply/
spur unit enclosed
Please note that an unswitched fuse spur us used
on the power supply unit. This does not aect the
performance of the unit.
SAFETY AND RECOMMENDATIONS
All wiring must comply with Building Regulations
and the current IEE Wiring Regulations 17th edition
(BS7671) or the equivalent standards for your
country. The nal installation should be examined
and tested by a qualied electrician.
DO NOT WIRE THROUGH A LIGHT SWITCH
• This is a constant trickle fan which requires
permanent electrical supply.
DO NOT REMOVE OR TAMPER WITH ELECTRONIC
CIRCUIT BOARD
• This is not a user function.
INSTALLATION INSTRUCTIONS
MAINS IN 12V DC OUT
12V DC PSUFUSED SPUR UNIT
FILTERLESS INFINITY FAN COMPONENTS
Central cartridge
Back Carcass
(Permanent xture
- DO NOT REMOVE
ONCE INSTALLED)
Impeller
Front cover