Operation Manual

1. Plug in Solo base station to power source
2. Connect the ethernet cable to modem
3. Ensure you have the EyezOn App on your mobile device.
Th
e EyezOn App is available at:
Installa'on Guide
1. Program Registration
Before doing anything you must ensure
that you have a valid EyezOn account. To set up your free
EyezOn account go here
www.eyezon.com select the CREATE ACCOUNT link at the top of the page and submit the form.
2. Log-In to EyezOn Account
Your EyezOn account is your management tool for your SOLO system. From www.eyezon.com
select the LOGIN link and use the credentials sent you when you registered to proceed to
your account.
3. Install and Activate Device
Before powering on, record the
12 digit ID from the bottom of the device. From inside your
EyezOn account select the Add New Device link and follow the instructions choosing SOLO as
the product type use the 12 digit ID from the bottom of the unit.
Ethernet Port
USB Power Port
To Connect
*Note: Before proceeding to the next steps, record the 12 digit ID from the sticker on the
bottom of the module. Make sure you have created an EyezOn account and have activated
the device using the 12-digit code (see opposite page).
Page 2
Page 3
For a complete guide to SOLO and your EyezOn account please na
vigate to
the
Help page within your EyezOn account. There you can find the step-by-step
guide to setting up and maintaining your system.
Reset/Program BuHon
4. Connect and Power On
See the diagram and instruction
s on the opposite page to complete the set up.