- Envision LCD Monitor User Manual

English

Deutsch Français

Care and Maintenance

Care

z Avoid exposing your monitor directly to sunlight or other heat source.

Place your monitor away from the sun to reduce glare.

z Put your monitor in a well ventilated area.

z Do not place any heavy things on top of your monitor.

z Make certain your monitor is installed in a clean and moisture-free area.

z Keep your monitor away from magnets,motors,transformers,speakers,

and TV sets.

Note

z Move the LCD out of the package and take off the plastic bag

and polystyrene Foam.

z Pull the base from Parallel versus Panel to Vertical.

z Adjust the Panel within 0 degree leaning forward and 20 degree

leaning backward.You must bend harder to exceed 20 degree

backward but this range is for packing the unit to a small size for

storage only.

Safety Tips

z If smoke,abnormal noise or odor came out from your monitor,

caution you should remove the power cord immediately and call

your service center.

z Never remove the rear cover of your monitor cabinet.The display

unit inside contains high-voltage parts and may cause electric

shock to human bodies.

z Never try to repair your monitor yourself.Always call your service

center or a qualified technician to fix it.

Troubleshooting

No power

z Make sure A/C power cord is securely connected to the power adapter

and the power supply is firmly connected to the monitor.

z Plug another electrical device into the power outlet to verify that the

outlet is supplying proper voltage.

z Make sure all signal cables are installed.

Power on but no screen image

z Make sure the video cable supplied with the monitor is tightly secured to

the video output prot on back of the computer.If not,tightly secure it.

z Adjust brightness.

Worng or abnormal colors

z If any colors(red,green,blue)are missing,check the video cable to make

sure it is securely connected.Loose or broken pins in the cable connector

could cause an improper connection.

z Connect the monitor to another computer.