User's Manual LCD TV L19W661 = 7 $
TABLE OF CONTENTS TABLE OF CONTENTS …………………………….………………….. 1 FOR YOUR SAFETY …………………………………………………... 2 PRECAUT IONS AND REMINDERS ……………………………………3 IMPORTANT SAFETY INSTRUCTIONS …………………………….. 5 ATTACHING WALL MOUNTING ARM………………………...….......9 PERIPHERAL CONNECTION GUIDE ………………………………. 11 OPERATING INSTRUCTIONS ………………………………………. 12 TO USE THE FRONT PANEL CONTROL …………………….. 12 TO USE THE REMOTE CONTROL ……………………………. 13 TO USE THE MENUS ………………………………………….….….
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) English NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PRECAUTIONS AND REMINDERS Don't place the TV in confined spaces or in a box when using it. Unplug immediately if is malfunction like no picture, no video/audio,smoke and bad odor from TV. Unplug immediately if other foreign materials are put inside TV box or if the TV fell down. Don't throw any object inside the TV box like metals or other flammable materials. Prohibit/Avoid opening TV cabinet English Place unit on even surfaces.
English Remember to unplug the AC cord from the AC outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to clean the display. Avoid direct sunlight, dusty, high humidity and smoky areas. Make sure to unplug the unit when not in use for a long period of time (days). Call service personnel to clean the internal part of the TV once a year. Do not cover or block any vents and openings. Inadequate ventilation may shorten the life of the display unit and cause overheating.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
English 18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product. Also,do not endanger yourself,or children,by placing electronic equipment/toys on the top of the cabinet.
PREPARATION English Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1. Install the base stand; place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.
3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). English 4. Power: Insert the power cord in the wall socket having an AC power supply. You can see LED states at the front panel. If the LED color is Green, means the TV set is power on. If the LED color is red , which means this TV set is in stand by state. 5. Turn on the TV: Push the POWER key on the Remote control or the control knobs on top of TV.
Attaching Wall Mounting Arm English Preparing to Install An Optional Wall Mounting Arm: 1. Remove the lid on back cover 2. push the stand ahead until hear“ka” This TV can be attached to a wall mounting arm you purchase separately (The height of WALL MOUNTING should be over 21mm). Disconnect power before this procedure.
1. 2. Remove the attached backcover . Follow the manufacturer's instructions to assemble the wall mounting arm. 3. Place the wall mounting arm onto the back of the TV. Line up the holes of the arm with the holes in the back of the TV. 4. Insert the 4 screws into the holes and tighten. Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall.
2 11 English
OPERATION INSTRUCTIONS TO USE THE FRONT PANEL CONTROL English Menu Power ʳ ĺ Ĺ ĸ ķ ʳ ʳ CH + ķ ʳʳ- CH - : Press to select the next lower Program number. CH +: Press to select the next higher Program number. ĸ ʳʳPower ʳ Power key: Press to turn on / off (standby) the TV set. (Press to turn on TV after the Power-ON status LED had changed to the Amber color and finished flashing.) Ĺ ʳMenu Menu key: Press to open or exit the OSD menu. ĺʳ ʳ - VOL + VOL - : Press to decrease the sound volume level.
TO USE THE REMOTE CONTROL “MUTE” “POWER” Press to set TV sound mute ON/OFF . Press to power ON /OFF (standby) TV. Power 1.Press to enter TV channel number to select channel . 2.Press the passcode to active the factory mode. 3.Press to active the factory mode. . “ ”(dot) “Pre-CH” Press to display the previous TV. 1 2 3 4 5 6 7 8 “Source” 1.Press repeatedly to select the input sources. 2.The Source List should be activated and show on OSD. Type the dot for digital channels.
TO USE THE MENUS Introduction When you use a menu or take an action, convenient instructions, help texts and messages will be displayed on your TV. Please, follow the displayed instructions and read the help text on the specific item highlighted. The color buttons perform different actions, when using on screen menu.
English Note: Sometimes not all the menu items are visible on the screen. Use cursor down to scroll down to additional items. - Use the cursor right to enter the right panel. The content of the right panel is moved to the left panel and the right panel shows the content of the newly highlighted item in the left panel. Note: In some cases, you will want to watch the picture on your screen while adjusting settings. This means that when the highlight is on the right side panel, the other menu items are hidden.
TV MENU-INSTALLATION Select the menu language 1.Press the MENU button on the remote control. 2.Use the cursor down to select Installation in the Settings menu. 3.Use the cursor right to enter the Installation menu. 4.Select Language and enter the list of available languages with the cursor right. English (English / Spanish/ French) 5.Select your preferred language with the cursor up/down and press the OK button to confirm your selection. 6.Proceed with the Installation menu. Store TV channels 1.
English When Antenna is selected, the TV will detect antenna signals and will search for antenna TV (NTSC and ATSC) channels available in your local area. When Cable is selected, the TV will detect cable company supplied signals and will search for cable TV (NTSC, ATSC, QAM modulated) channels available in your area. Make sure that registration with your cable TV provider and connection of equipment are completed. 4.Select Start now with the cursor right key. 5.Press the OK button. 6.
take longer than Analog to find and program. Please wait until you see the Auto Programming complete message. The TV will then switch automatically to the first channel found. Note: All channels must be unlocked in order to autoprogram. If requested, enter your PIN code to unlock all channels. (p.35 ) Notes: English • When you have locked TV channels before initiating Autoprogram, a message appears asking to enter your PIN code in order to complete Autoprogramming.
with the message Audio only. Note: Subchannel selections The new standards employed with digital broadcasting make it possible to receive multiple program channels under a single major channel number which can be selected by pressing the digit remote control Important: After the installation of the TV channels is completed, always make a selection in the Installation menu between Antenna or Cable whether you want to watch Antenna TV channels or Cable TV channels.
Here’s how: 1.In the antenna mode, select a channel from the displayed list of TV channels. Select the “Start” by pressing red button on the remote control; TV set will detect the signal. 2.The signal strength is continuously displayed and updated as you rotate the antenna. English When strength is enough to identify, user can store the channel in the channel list by pressing green button on the remote control. Current software info This menu will appear with your TV software information. 1.
This menu allows you to identify the accessory devices you have connected to the external inputs/outputs. 1.Select Source in the Installation menu. 2.Press the cursor right to enter the list, and press up/down key to the selected input. Analog Audio In If your accessory device has a DVI output connector, only the video signal is transmitted in digital format. To input an audio signal, please connect the analog audio L and R outputs to the TV’s L and R AV2 audio input plugs.
AV1 AV1 supports component input. AV2 (S-video/CVBS) AV2 supports two source inputs (S-video and CVBS) and automatically search the inputs, S-video is the high priority. In case you have two inputs and want to show the signal from CVBS, please turn English off S-video device or plug off s-video cable." Clock This allows you to use your TV as a clock. 1.Press the MENU button on the remote control. 2.Use the cursor down to select Installation in the Settings menu. 3.
This function allows you to reset most of the picture and sound settings to their default factory levels. 1.Select Reset AV settings with the cursor down key. 2.Press the cursor right key. 3.Press the OK button to erase settings and reset them to their default values. English TV MENU- FEATURES Features menu 1.Select Features in the TV Settings menu. 2.Press the cursor right key to enter the features menu. 3.
English This displays the transmitted CC- or CS-text on the screen according to your chosen CC or CS service in the Feature menu. This text can either be permanently displayed (assuming that the service is available in the broadcast) or only when mute is active. 1.Press the cursor right key after having selected Closed captions. 2.Select On, Off or On during mute. Caption service This allows you to select the Closed Captions service levels of analog broadcasting to be displayed.
Captions programs, news, weather informations or stock market reports. Not all Caption services are necessarily being used by a TV channel during the transmission of a Closed Caption program. 4.See Closed Caption in the TV, Features menu, to turn the Caption service On or Off. with the EIA-608 standard and in accordance with Sections 15.119 of the FCC rules. Note: The captions do not always use correct spelling and grammar.
contains captions in a secondary language, which is a translation of the captions in the primary Caption Service. The other service subchannels are not pre-assigned. It is up to the discretion of the individual caption provider to utilize the remaining service channels. Digital caption options English This allows you to modify how digital captions are displayed on your TV. Select from the following options to change the visual characteristics of your TV’s digital captioning.
• Text Select this option to choose caption display text box, text color and/or the opacity according to your own preference. Select a color and an opacity option. • Background Select this option to choose caption display character back ground color or one color and one of the opacity options. Note: Opacity is transparent (allowing light to pass through) Preferred channels A channel, when installed, is marked as preferred by default and added to the channel list.
Sleeptimer English This sets a time period after which the TV automatically turns to standby. 1.Select Sleeptimer. 2.Press the cursor right key. 3.Select a value with the cursor up/down key. The list will have values from Off to 180 minutes. When Off is selected, the sleeptimer is turned off. You can always turn off your TV earlier or select another time set. TV menu-Picture & Sound TV MENU-PICTURE Note: Some menu items are not available in case of HD sources.
1.Press the cursor right key to select Picture. 2.Press the cursor right key again to enter the Picture menu. 3.Select the menu items with the cursor up/down key. 4.Adjust the settings with the cursor left/right key or enter the list of submenu items with the cursor right key. Select a submenu item with the cursor up/down English key. Auto picture 1.Select Auto picture to display a list of predefined picture settings, each corresponding with specific factory settings.
the Picture menu, all values of the menu will overwrite those previously made in personal setting. Contrast This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged. The tuning range is 0 ~ 100. Brightness English This will adjust the light output of the complete picture, which will mainly affect the darker areas of the picture. The tuning range is 0 ~ 100. Color This will adjust the saturation level of the colors to suit your personal preference.
English TV MENU- SOUND 1. Select Sound in the TV Settings menu. 2.Press the cursor right key to enter the sound menu. 3.Select the menu items with the cursor up/down key and adjust the settings with the cursor left/right key. 4.Remember, control settings are at normal mid-range levels when the bar scale is entered. Auto sound Select Auto sound to display a list of predefined sound settings, each corresponding with specific factory settings of Treble and Bass.
1.Press the cursor right key to enter the list. 2.Press the cursor up/down key to select a predefined sound setting (Personal/Speech/Movies). Personal refers to the personal preference sound settings in the sound menu. The default mode is Speech. Note: The moment you are in a predefined Auto sound setting and you modify the Sound menu, all values of the menu will overwrite those previously made in English personal setting.
This gives you the possibility to swap between main and alternative language, when it is available in digital channel. AVL (Automatic Volume Leveler) Automatically reduces the volume differences between channels and programs, providing a more constant overall level. This will also reduce the dynamics of sound.
Parental Control menu This menu can control special functions for the TV channels. 1.Select Parental Control in the TV settings menu with the cursor up/down key. 2.Press the cursor right to enter the channels menu. 3.Press the cursor up/down key to select a channels menu item. Change PIN English 1.Select Set or Change PIN with the cursor down. 2.If no PIN-code exists, the menu item is set to Set PIN. Follow the instructions on screen.
English TV ratings lock 35
English Your TV is equipped with a V-chip. This allows you to control access to individual programs based on their movie and TV ratings. All settings apply to all AV inputs, except HDMI. The program content advisory data are sent by the broadcaster or program provider. 1.Select TV ratings lock with the cursor down. A list appears, showing the age-based TV ratings and a corresponding content-based ratings list. 2.Press the cursor right to enter the list. 3.
When All has been selected, all items in the age-based and in the contents-based lists are locked. If, while All is selected, any other item, either an age-based or content-based item, is unselected, then All is automatically unselected. None is the selection for items that either have no rating information or have a selected, all items below that item of the same group are locked as well.
TV-Y appropriate for children of all ages with themes and elements suitable for children aged 2-6 TV-Y7 programs designed for children age 7 and older TV-Y7-FV programs include fantasy violence more intense than other programs in the TV-Y7 category TV-G programs suitable for all ages.
MPAA ratings (Motion Picture Association of America). 1.Select Movie ratings lock with the cursor down. A list appears, showing all valid MPAA content ratings. 2.Press the cursor right to enter the list. You are asked to enter your code. (See Set/Change PIN, p. 34.) If the code is correct, the Movie ratings lock menu reappears. 3.Select a movie rating with the cursor up/down. 4.Press OK to activate/de-activate the selected rating.
NR not rated G movies with a mild content, suitable for all ages PG movies for which parental guidance is recommended. They may contain a few racy or violent scenes or maybe some bad language PG-13 movies for which parental guidance may be recommended if under age 13 English R restricted. The movies usually contain offensive sex or bad language and may be unsuitable for children under the age of 17. Parental guidance or permission needed. NC-17 even with parental permission, forbidden under age 17.
1.Select Region ratings lock with the cursor down. A list appears, showing the age-based Region ratings and a corresponding contentbased ratings list. 2.Press the cursor right to enter the list. 3.Select an age-based Region rating with the cursor up/down, and enter, if present, the list with content-based ratings with the cursor right, and select one 4.Press OK to activate/de-activate the selected rating. You are asked to enter your PIN-code (see Set/Change PIN, p. 34).
This allows you to clear all the locks that you have set in the Region ratings lock table. 1.Select Clear regions locks with the cursor down. 2.Enter your PIN-code to clear all region ratings’ status. PC MENU-INSTALLATION English Select the menu language Note: Press SOURCE button on the remote control to make sure the source is selected in PC mode. 1.Press the MENU button on the remote control. 2.Use the cursor down to select Installation in the Settings menu. 3.
English Source 1.Select Source in the Installation menu. 2.Use the cursor right to enter the Source menu. 3.Select PC with the cursor up/down and press the OK button to confirm your selection. Picture adjustment 1.Select Picture adjustment in the Installation menu. 2.Use the cursor right to enter the Picture adjustment menu. 3.You can choose Auto adjust or Manual adjust with cursor up/down and press OK button to confirm.
Auto adjust Automatically adjust to the best image position, phase and clock setting. Manual adjust Manually fine tune the image as it appears on the screen. • Phase Eliminates the horizontal interfering lines. English • Clock Eliminates the vertical interfering lines. • Horizontal Adjust the horizontal placement of the picture. • Vertical Adjust the vertical placement of the picture. Factory reset This function allows you to reset most of the picture and sound settings to their default factory levels.
English PC MENU-PICTURE Picture menu 1.Press the cursor right key to select Picture. 2.Press the cursor right key again to enter the Picture menu. 3.Select the menu items with the cursor up/down key. 4.Adjust the settings with the cursor left/right key or enter the list of submenu items with the cursor right key. Select a submenu item with the cursor up/down key. Contrast This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged. The tuning range is 0 ~ 100.
This will increase or decrease Warm (red) and Cool (blue) colors to suit personal preferences (Normal/Warm/Cool). The default mode is normal. Select Cool to give the white colors a blue tint, Normal to give the white colors a neutral tint, Warm to give the white colors a red tint. Picture format English This menu item performs 4:3 or Full screen in PC mode. PC MENU-SOUND Sound menu 1.Select Sound in the TV Settings menu. 2.Press the cursor right key to enter the sound menu. 3.
4.Remember, control settings are at normal mid-range levels when the bar scale is entered. English Auto Sound Select Auto sound to display a list of predefined sound settings, each corresponding with specific factory settings of Treble and Bass. 1.Press the cursor right key to enter the list. 2.Press the cursor up/down key to select a predefined sound setting (Personal/Speech/Movie). The default mode is Speech. Personal refers to the personal preference sound settings in the sound menu.
TIPS Care of the screen Do not rub or strike the screen with anything hard as this may scratch, mar, or damage the screen permanently. Unplug the power cord before cleaning the screen. Dust the TV by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid cleaners or aerosol cleaners.
Canadian notice – This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. English Avis Canadian – Cat apparel numerous de la classed B respected toutes les exigencies du règlement sur le materiel brouilleur du Canada.
PRODUCT SPECIFICATION NOTE: *This model complies with the specifications listed below. *Designs and specifications are subject to change without notice. *This model may not be compatible with features and/or specifications that may be added in the future.
BEFORE CALLING SERVICE Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty.
GLOSSARY Audio / Video Inputs Located on the rear and the front of the receiver these connectors (RCA phono type plug) are used for the input of audio and video signals. Designed for use with VCRs (or other accessories) in order to receive higher picture resolution and offer sound connection options. English Menu An on-screen listing of features shown on the TV screen is made available for user adjustments.
