- Envision LCD Flat Panel TV User's Manual L19W661

take longer than Analog to find and program. Please wait until you see the Auto

Programming complete message. The TV will then switch automatically to the

first channel found.

Note: All channels must be unlocked in order to autoprogram. If requested, enter

your PIN code to unlock all channels. (p.35 )

Channel tuning

Available channels:

- Cable (analog NTSC or digital QAM)

- Terrestrial (analog NTSC or digital ATSC)

If a tuned channel is not yet in the master channel map, the TV will attempt to

tune to the channel and it will be added to the map.

If the channel is not acquired, a message will appear reporting that the channel is

not available. When you tune an audio-only digital subchannel, a display appears

Notes:

• When you have locked TV channels before initiating Autoprogram, a

message appears asking to enter your PIN code in order to complete

Autoprogramming.

• When channel update is interrupted, the new updated channel information

is retained along with the old un-updated channel information.

• Channel information about an ATSC channel is updated only for the ATSC

channel currently tuned.

• If an NTSC channel is tuned, then in Background Autoprogramming the TV

will scan all the possible ATSC frequencies and update information.

• Weak channel installation allows you to manually tune weak ATSC

channels in order to adjust the antenna and thus optimize signal quality for

that channel. (See Installation menu, Weak channel installation, p. 19.)

• Once you have searched for the available Antenna as well as the Cable TV

channels, they are stored in the memory.

• If Antenna/cable signal is interrupted more than 30 minutes, TV will go into

off mode. You are requested to press Power button

or CH + / - button to turn on the TV.

English