- Envision LCD Flat Panel TV User's Manual L19W661

6
18. Tilt/Stability All televisions must comply with recommended international
global safety standards for tilt and stability properties of its cabinets design.
Do not compromise these design standards by applying excessive pull
force to the front, or top, of the cabinet, which could ultimately overturn
the product.
Also,do not endanger yourself,or children,by placing electronic
equipment/toys on
the top of the cabinet.Such items could
un
suspectingly fall from the top of the set and cause product damage
and/or personal injury.
19. Wall or Ceiling Mounting The appliance should be mounted to a wall or
ceiling only as recommended by the manufacturer.
20. Power LinesAn outdoor antenna should be located away from power lines.
21. Outdoor Antenna Grounding If an outside antenna is connected to the
receiver, be sure the antenna system is grounded so as to provide some
pro
tection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides
in
formation with respect to proper grounding of the mats and supporting
structure grounding of the lead-in wire to an antenna-discharge unit, size of
grounding
connectors, location of antenna-discharge unit, connection to
grounding
electrodes and requirements for the grounding electrode. See
Figure below.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL
CODE
Note to the CATV system installer: This reminder is provided to call the
CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines
for proper grounding and, in particular, specifies that the cable
ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Please, make sure to connect the power plug to the wall outlet socket after
connecting the TV to the adapter!
22. Objects and Liquid EntryCare should be taken so that objects do not fall
and
liquids are not spilled into the enclosure through openings.
hsi
l
gnE