R USER’S MANUAL L42H761 Thank you very much for choosing the AOC Envision Series LCD TV. We recommend that you take a few minutes to read carefully through this manual before installing and using the TV. Please keep this manual in a safe place for your future reference. www.AOC .
LCD TV TABLE OF CONTENTS FOR YOUR SAFETY------------------------------------------------------- 1 DECLARATION OF RoHs COMPLIANCE---------------------------- 3 PRECAUTIONS AND REMINDERS------------------------------------ 4 IMPORTANT SAFETY INSTRUCTIONS------------------------------ 6 MOUNTING THE TV BASE---------------------------------------------- 8 PREPARATION-------------------------------------------------------------- 9 TO USE THE REMOTE CONTROL------------------------------------11 Peripheral Connec
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) English NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SYMBOL DEFINITION SA 1965 DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
DECLARATION OF RoHs COMPLIANCE This product has been designed and manufactured in compliance with Directive 2002/95/ EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance English Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr6+) Polybrominated
PRECAUTIONS AND REMINDERS Don’t place the TV in confined spaces or in a box when using it. Unplug immediately if is malfunction like no picture, no video/audio,smoke and bad odor from TV. Unplug immediately if other foreign materials are put inside TV box or if the TV fell down. Don’t throw any object inside the TV box like metals or other flammable materials. Prohibit/Avoid opening TV cabinet English Place unit on even surfaces.
Remember to unplug the AC cord from Avoid direct sunlight, dusty, high humidity the AC outlet before cleaning. Do not use and smoky areas. liquid cleaners or aerosol cleaners to clean the display. English Make sure to unplug the unit when not in use for a long period of time (days). Call service personnel to clean the internal part of the TV once a year. Do not cover or block any vents and openings. Inadequate ventilation may shorten the life of the display unit and cause overheating.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product. Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet.
MOUNTING THE TV BASE English The TV base will be separated with the TV unit. You should Install the base before you use the TV unit. 1. Place the TV on its face on a soft blanket. 2. Install the base stand with three screws. 3. Place the TV on the table. WALL MOUNT Use of Wall Mount Bracket: 1. 2. 3. 4. Remove the hinger cover. Remove the 6 units M4.0 screws. Remove the base ass’y. Fasten four units M6.0 X 10mm screws to secure the wall mount bracket.
PREPARATION Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! English Min 1m 1. Install the base stand; place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.
3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AA 1.5V). English 4. Power: Insert the power cord in the wall socket having an AC power supply. You can see LED states at the front panel. If the LED color is Green, means the TV set is power on. If the LED color is Orange, which means this TV set is in standby state. 5. Turn the TV on: Push the POWER key on the Remote control or the Front panel control knobs.
TO USE THE REMOTE CONTROL MUTE Press to set TVsound mute ON/ OFF POWER Press to power ON/OFF (standby) TV.(Note:1.TV is never completely power off. unless physically unplugged. 2.Press to turn on TV after the power on status LED had changed to the amber color and stopped flashing. ) PREV CH Press to display the previous TV . MTS/SAP Press to activate the NTSC TV sounds, such as: Stereo, SAP or Mono tone.
WIDE Press this button to display a list of available display formats. Available display formats are determined by the type of signal you are receiving. To choose the display format you prefer, press the WIDE button repeatedly: English Automatic, Super Zoom, 4:3, Movie expand 14:9, Movie expand 16:9, 16:9 subtitle and widescreen.
PERIPHERAL CONNECTION GUIDE AC POWER English Head Phone R L Video S-Video POWER HDMI 2 HDMI 1 RS-232 Headphone HDMI S-Video Audio In D-SUB Line In PC L/R SPDIF VGA 15-pin D-Sub AV 1 S-VIDEO Pr Component 1 TV Cable Component 2 Component Pb Y L R Once your equipment is connected, use the following procedure to view the input signal: Press the source button on the remote controller to select the relevant source to view.
CAMERA CAMCORDER VIDEO GAME How to connect How to use it 1. Select the video AV or S terminal input. 2. Enable the exterior AV equipment. Warning: In case you notice scrolling images, wrong colors or no color, no picture or even combinations of these, on your screen, check if the connections are done in the right way. Check if the cable colors match with the Input connector colors. OPERATION INSTRUCTIONS 1 2 3 4 5 6 7 1.VOL▲ VOL +: Press to increase the sound volume level. 2.
To use the menus Introduction When you use a menu or take an action, convenient instructions, help texts and messages will be displayed on your TV. Please, follow the displayed instructions and read the help text on the specific item highlighted. The buttons perform different actions, when using on screen menu. By pressing the corresponding button on the remote control to perform the required action when using these menus.
Settings Installation 6 Language Language English Autoprogram Français Source Español Clock Current software info Reset AV settings Press the cursor right select your menu language. Settings Autoprogram Installation 2 Cable Antenna Cable Start now Television installation You can now start automatic installation. This proceclure can take more than half an hour. EXIT Previous Start 3 Select the menu language 1 Press the MENU button on the remote control.
Channel tuning Available channels: - Cable (analog NTSC or digital QAM) - Terrestrial (analog NTSC or digital ATSC) If a tuned channel is not yet in the master channel map, the TV will attempt to tune to the channel and it will be added to the map. If the channel is not acquired, a message will appear reporting that the channel is not available. When you tune an audio-only digital subchannel, a display appears with the message Audio only.
Installation Source 7 8 Language TV Autoprogram Component1 Source Component2 Clock AV1 Weak channel installation HDMI1 Current software info HDMI2 Reset AV settings AV2 Source This menu allows you to identify the accessory devices you have connected to the external inputs/outputs. 1 2 3 PC Here you can select the accessory devices you have connected to the external inputs/outputs.
TV menu-Features Settings 6 Features Picture Closed captions Sound Caption service Features Digital caption service Parental Control Digital caption options Installation Preferred channels Exit Sleeptimer 6 Features menu 1 Select Features in the TV Settings menu. 2 Press the cursor right key to enter the features menu. 3 Select the menu items with the cursor up/down key and adjust the settings with the cursor left/ right key. The features menu gives you control over special.
6 Digital caption serv Closed captions CS-1 Caption service CS-2 Digital caption service CS-3 Digital caption options CS-4 6 CS-5 Preferred channels Sleeptimer CS-6 0 This allows you to select one of the digital service channel made available by the individual caption provider.
Settings Features 6 Preferred channels Closed captions 2 Caption service 3 Digital caption service 4 Digital caption options 5 Preferred channels Preferred channels A channel, when installed, is marked as preferred by default and added to the channel list. This feature provides the ability to remove a channel number from the channel list. 1 6 Sleeptimer 7 0 2 8 9 You can browse through the TV channels with the -P+button.
TV menu-Picture & Sound 6 Picture Smart picture Sound Contrast Features Brightness Parental Control Color Installation Sharpness Exit Color temperature 10 1 2 3 4 Tint Noise reduction The picture menu contains the settings that affect the quality of the picture.
Sharpness This will adjust the sharpness of fine details in the picture. Color temperature This will increase or decrease Warm (red) and Cool (blue) colors to suit personal preferences. Select Cool to give the white colors a blue tint, Normal to give the white colors a neutral tint, Warm to give the white colors a red tint. English Tint Allows you to select the picture‘s color mix or hue. Noise Reduction Reduce picture noise. Dynamic contrast Enhance contrast ratio.
Settings Sound 5 Sound mode Smart sound Mono Sound mode Stereo Alternate audio Virtual Surround 3 Digital audio language Sound mode This select the modes for more spatial or surround sound reproduction dependent on the broadcast signals or signals from external inputs received.
TV menu-Parental Control Settings 6 Parental Control Picture Channel lock Sound TV ratings lock Features Movie ratings lock Parental Control Region ratings lock Installation Clear regions lock Exit Change PIN 6 Parental Control menu This menu can control special functions for the TV channels. 1 Select Parental Control in the TV settings menu with the cursor up/down key. 2 Press the cursor right to enter the channels menu. 3 Press the cursor up/down key to select a channels menu item.
TV-14 TV-MA Content-based Rating none none none (FV) Fantasy Violence none (D) Dialog (L) Language (S) Sex (V) Violence (D) Dialog (L) Language (S) Sex (V) Violence (L) Language (S) Sex (V) Violence TV-Y TV-Y7 TV-Y7FV TV-G TV-PG TV-14 TV-MA When All has been selected, all items in the age-based and in the contents-based lists are locked. If, while All is selected, any other item, either an age-based or content-based item, is unselected, then All is automatically unselected.
Settings Parental control 6 Movie ratings Channel lock All TV ratings lock NR Movie ratings lock G Region ratings lock PG Clear regions lock PG-13 Change PIN R NC-17 X This allows you to limit access to individual programs based on their MPAA ratings. Movie Ratings Lock This function allows you to control access to individual movies based on their MPAA ratings (Motion Picture Association of America). English Select Movie ratings lock with the cursor down.
Parental control 8 EntireAudience EntireAudience None Dialogue TV-G Language TV-PG Sex TV-14 Violence TV-MA Children 5 1 2 3 FantasyViolence MPAA This allows you to control access to individual programs based on their broadcasted regional rating.
PC menu-Installation Settings Installation 4 Language Language English Source Français Picture adjustment Español 3 Factory reset English Select your menu language with the cursor up/down. Press the OK key on the remote control to confirm. Settings Installation 4 Source Language TV Source Component1 Picture adjustment Component2 Factory reset 8 AV1 Select the menu language Note: Press SOURCE button on the remote control to make sure the source is selected in PC mode.
PC menu-Picture 4 Picture Picture Contrast Sound Brightness Installation Color temperature Exit Picture format 4 The picture menu contains the settings that affect the quality of the picture. Settings Picture 4 Color temperature Contrast 50 Normal Brightness 50 Warm Color temperature 3 Contrast This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged.
PC menu-Sound Settings 4 Sound Picture Smart sound Sound Virtual surround 2 Installation Exit Sound menu 1 Select Sound in the TV Settings menu. 2 Press the cursor right key to enter the sound menu. 3 Select the menu items with the cursor up/down key and adjust the settings with the cursor left/right key. 4 Remember, control settings are at normal mid-range levels when the bar scale is entered. English The sound menu contains the settings that affect the reproduction of the sound.
TIPS Mobile telephone warning To avoid disturbances in picture and sound, malfunctioning of your TV or even damage to the TV, keep away your mobile telephone from the TV. End of life directives We are paying a lot of attention to produce environmentally friendly in green focal areas. Your new receiver contains materials which can be recycled and reused.
BEFORE CALLING SERVICE Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow “Ghost ” or double image *This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may inprove the picture.
GLOSSARY S-Video Input Allows direct connection of high-resolution video sources, such as a Super VHS videocassette recorder, Laser Disc player, etc. Provides improved picture resolution, sharpness, and clarity. Menu An on-screen listing of feature controls shown on the TV screen that are made available for user adjustments. Programming The procedure of adding or deleting channel numbers into the TV’s memory.
PRODUCT SPECIFICATION 42” Wide screen Full HD (1920x 1080) Resolution High Brightness (500 cd/m2) High Contrast Ratio (1500:1) Wide Viewing Angle (176 H / 176 V) Analog TV: Built-in 181 channel Tuner with MTS, SAP, Closed Caption & V-chip Digital TV: ATSC 8-VSB Feature English Items LCD Panel Digital TV Analog TV Specification Resolution 1920 × 1080 (Full HD) Video System ATSC 8-VSB, MP@HL/MP@ML Sound System PCM/MPEG(Layer I &II) Video System NTSC 181 Channel with Electronic PLL Tuner Sound Syst