Operating instructions

ManualsBrandsEnvision ManualsLED displaysH819

Downloaded from ManualMonitor.com Manuals

Summary of content (22 pages)

PAGE 1
Downloaded from ManualMonitor.
PAGE 2
TABLE OF CONTENTS FOR YOUR SAFETY -------------------------------------------------- 1 SAFETY PRECAUTIONS -------------------------------------- 2 SPECIAL NOTES ON LCD MONITORS ------------------- 3 BEFORE YOU OPERATE THE MONITOR --------------------FEATURES -------------------------------------------------------PACKING LIST --------------------------------------------------INSTALLATION INSTRUCTIONS --------------------------CONTROLS AND CONNECTORS -------------------------ADJUSTING THE VIEWING ANGLE ------
PAGE 3
Fu. Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 4
PRECAUTIONS  Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.  Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
PAGE 5
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial • • • • use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.
PAGE 6
INSTALLATION INSTRUCTIONS SWIVEL BASE Install Figure 1 Remove Installing and Removing the Swivel Base POWER CORD Power Source: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an External universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3. Connect the AC-power cord one end to your LCD monitor’s AC-input socket , the other end to wall-outlet .
PAGE 7
CONTROLS AND CONNECTORS VIDEO CABLE Connecting the D-Sub Cable: Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port. Connecting the Power Cord: Connect the AC-power cord one end to your LCD monitor’s AC-input socket , the other end to wall-outlet . Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied). Figure 2 1. Signal Cable 2.
PAGE 8
ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monitor’s angle from -5° to 20°. Figure 3 NOTES • Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
PAGE 9
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the video cable from the monitor to the video card. • Press the power button to turn on the monitor position. The power indicator will light up.
PAGE 10
FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • MENU / ENTER : Activate OSD menu when OSD is OFF or function adjust . • ECO Adjust Key: Press the key enter into the ECO modet / DCR modet or function adjust. • 16:9/4:3 shortcut key: Press the key to Adjust 16:9/4:3 or function adjust. • Power Indicator: Green — Orange — Power On mode. Off mode. • Auto Adjust button / Exit: 1. 2.
PAGE 11
HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press ▲ or ▼ to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. If the function selected has a sub-menu, press ▲ or ▼ again to navigate through the sub-menu functions. Once the desired function is highlighted, press MENU-button to activate it. 3. Press ▲or ▼ to change the settings of the selected function. 4. To exit and save, select the exit function.
PAGE 12
ADJUSTING THE PICTURE The descriptions for function control LEDS Main Main Menu Sub Menu Sub Menu Menu Item Item Icon Icon Contrast Contrast from Digital-register Brightness Eco mode Luminance Gamma DCR Backlight Adjustment Standard Text Internet Game Movie Sports Gamma1 Gamma2 Gamma3 On/ Off Clock Image Phase Setup H.Position Description V.Position Standard Mode Text Mode Internet Mode Game Mode Movie Mode Sports Mode Adjust to Gamma 1. Adjust to Gamma 2. Adjust to Gamma 3.
PAGE 13
Main Menu Item Main Menu Icon Sub Menu Item Sub Menu Icon Description Full Enhance On/Off Disable or Enable Full Enhance Mode Nature Skin On/Off Disable or Enable Nature Skin Mode On/Off Disable or Enable Green Field Mode On/Off Disable or Enable Sky-blue Mode On/Off Disable or Enable AutoDetect Mode On/Off Disable or Enable Demo Green Field Color Boost Sky-blue AutoDetect Demo Picture Boost Frame Size Adjust Frame Size Brightness Adjust Frame Brightness Contrast Adjust Frame Cont
PAGE 14
Main Menu Item OSD Setup Extra Main Menu Icon Sub Menu Item Sub Menu Icon H.Position Adjust the horizontal position of OSD V.
PAGE 15
PLUG AND PLAY Plug & Play DDC 2B Feature This monitor is equipped with VESA DDC 2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC 2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC 2B channel.
PAGE 16
TECHNICAL SUPPORT (FAQ) Problem & Question Power LED is not on No Plug & Play Picture is fuzzy Picture bounces or a wave pattern is present in the picture The power LED is ON but there’s no video or no picture. Missing one of the primary colors (RED, GREEN, or BLUE) Screen image is not centered or sized properly.
PAGE 17
ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connected , If the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode ,set the computer to display mode given in the following table. 16 Downloaded from ManualMonitor.
PAGE 18
APPENDIX SPECIFICATIONS LCD Panel Driving system 18.5” TFT Color LCD Viewable 470mm diagonal Image Size Pixel pitch Video 0.3mm( H ) × 0.3mm( V ) R,G,B Analog Interface Separate Sync. H/V TTL Input H-Frequency 31kHz – 80kHz V-Frequency 55-75Hz Dot Clock 85.5MHz Max. Resolution EPA ENERGY STAR® 1366 × 768 @60Hz VESA DDC 2BTM Plug & Play ON Mode OFF Mode Input Connector Input Video Signal Maximum Screen Size ≤25W ≤1W 15-pin D-Sub Analog:0.7Vp-p(standard), 75 OHM, Positive Horizontal : 409.
PAGE 19
Switch External Controls: Functions Power Consumption ( Maximum ) Regulatory Compliance • Auto Adjust Key • ECO Adjust Key/DCR shortcut key • 16:9/4:3 shortcut key • Power Button • MENU • Luminance • Image Setup • Color Temp • Color Boost • Picture Boost • OSD Setup • Extra • Reset • Exit 25 Watts CE 18 Downloaded from ManualMonitor.
PAGE 20
Preset Display Modes STANDARD RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY VGA 640 x 480 @60Hz 31.469 59.940 VGA 640 x 480 @67Hz 35.000 66.667 VGA 640 x 480 @72Hz 37.861 72.809 VGA 640 x 480 @75Hz 37.500 75.000 Dos-mode 720 x 400 @70Hz 31.469 70.087 SVGA 800 x 600 @56Hz 35.156 56.250 SVGA 800 x 600 @60Hz 37.879 60.317 SVGA 800 x 600 @72Hz 48.077 72.188 SVGA 800 x 600 @75Hz 46.875 75.000 Mac-mode 832 x 624 @75Hz 49.725 74.500 XGA 1024 x 768 @60Hz 48.
PAGE 21
1 5 6 10 11 15 15 - Pin Color Display Signal Cable PIN NO. 1. 2. 3. 4. 5. 6. 7. 8. DESCRIPTION Red Green Blue Ground Ground R-Ground G-Ground B-Ground PIN NO. DESCRIPTION 9. 10. 11. 12. 13. 14. 15. +5V Detect Cable Ground DDC-Serial Data H-Sync V-Sync DDC-Serial Clock 20 Downloaded from ManualMonitor.
PAGE 22
ISO 14001 Certification ISO 14001 certification is the pattern of certification of the environmental management system, is the core standard of ISO14000 series of standard on environmental management. 21 Downloaded from ManualMonitor.