User manual

E-Print 202 / 202 wireless User Manual 16
6.6.2 Wireless communication (E202 wireless only)
• E-print 202 wireless also incorporates a wireless data interface (IEEE 802.15.1).
• Prior to wireless printing the >Printer ID<, that is found on a label on the E202 wireless, has
to be used to connect host device and printer with each other.
• The printer ID can also be acquired by performing a printer self test ( chapter 6.4 / 6.5 )
• The printing distance between E-print 202 wireless and the host device can be up to 10m if
there is a clear line of sight between the devices, with no obstructions.
During the data transfer from the device to the printer, the Blue LED function indicator is
on. Once the data transfer is completed, the blue LED goes off and the printing starts.
If data transfer fails, the Red LED function indicator will start flashing and there will be a
continuous audible beep sound.
During the printing process, the printer will not respond to any buttons which are pressed.