User manual

E-Print 202 / 202 wireless User Manual 8
5.3 Battery Charging
When the device battery is charging, the red power LED indicator is lit. When the battery is
full, the red LED indicator will be switched off.
Important: If the printout is not clear, or if the power LED indicator is not lit or both LED
indicators are flashing red, the battery might be deep discharged or the power voltage is too
low. Please charge immediately and/or check that an appropriate charger is used.
5.3.1 Charging from a mains wall outlet
1. First plug the connector jack from the
charger into the printer, then connect the
charger to the wall outlet.