Operation Manual

7
Amplifier Connection
Connect audio plugs to the input on your mixer or
amplifier:
Please note that the sound may be distorted when using
Phono input. If this is the case, please use an AUX input
instead
 Red plug into right channel input.
 White plug into left channel input.
Playing a record
Open the lid of your turntable.
Place the record of your choice on the turntable.
If it is a 45 RPM record, do not forget to place the
adapter on the record spindle.
Choose the desired playing speed. Using the
Speed selector switch you can alter the speed
between 33, 45 and 78RPM.
Activate the turntable by pressing the ON/OFF
button.
Release the tone arm lock and lift the tone arm
using the lift lever.
Lift the tone arm into place over the desired track
on the record. The turntable will start rotating
automatically.
Gently lower down the lever and the tone arm will
slowly lower itself onto the record and the record
will start playing.
If the Auto-stop switch is in the ON position the
turntable will stop automatically when reaching
the end of the record.
If a record has additional tracks that are not
played with the Auto-stop switch in the ON
position, switching the Auto-stop switch to the OFF
position may allow the playback of these
additional tracks.