Operation Manual

Page 7
press and hold the CUE button to start playback. When you
release the CUE button, the track will return to the CUE
point and the track will be paused. While you are holding
down the CUE button, you can press PLAY then release
both buttons to allow playback to continue normally.
3. PITCH ± Pressing one of these buttons will bend the pitch of
the track on that deck, slightly decreasing or increasing its
speed. By clicking on both buttons at the same time, the
track will return to its normal pitch (this is an important
feature when manually aligning the beats of two tracks).
4. JOG WHEEL Scratches or searches through the track on
that deck, depending on the JOG WHEELS’ current mode
(as set by the SCRATCH /SEARCH button): Scratch mode:
When the Scratch LED is lit, moving the JOG
WHEEL ”Scratches” on the track on that deck - an effect
similar to moving the platter on a turntable.